Typical Spring Deflection for Trailer Leaf Springs When at Weight Capacity
Updated 01/02/2025 | Published 02/15/2015 >
Question:
How much deflection is allowed for at rated spring capacity. Or: rated capacity = how much capacity?
asked by: Josh L
1
Helpful Expert Reply:
Typical spring deflection is up to 1-1/2 inches when at capacity.
So the # e46SR that you referenced should see right at 1-1/2 inches of deflection when it has 3,000 lbs on it. I attached a review video for this spring as well.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Bushing Not Included
- 6000 lbs
- 1-3/4 Inch Wide
- 1 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: trailer fenders
- Search Results: spring spacer
- Search Results: metal valve stems
- Search Results: reese gooseneck installation kit
- Search Results: reese goose box
- Search Results: goosebox
- Search Results: bunk brackets
- Shop: Gooseneck Hitch
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,200 lbs
- Q&A: Recommended 2" Lift Kit for a Tandem Axle Trailer w/ Axles Below the Leaf Springs
- Video: Let’s Check Out the Trailer Axle with Idler Hubs
- Shop: Trailer Wiring
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: Big Truck Big RV Trailer Jack Foot Scale with Tongue Weight Gauge - 2,000 lbs
- Q&A: What Is Normal Deflection Of Leaf Springs On Trailer
- Q&A: Will MORryde Alltrek 4000 Cushioned Equalizer Lift Trailer Suspension
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Aluminum Viking Series Valhalla Trailer Wheel - 16" x 6" - 6 on 5-1/2 - Black Spoke
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Q&A: What Is Minimum Distance You Can Have Between Front and Rear Tires of Tandem Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Is the Big Truck Big RV Trailer Jack Foot Scale Hydraulic, Pneumatic, or Spring Driven?
- Q&A: Does Pin of Big Truck Big RV Trailer Jack Foot Scale # BTBRV014 Have to be Used for Scale to Work
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Trailer Hitch
- Video: An In-Depth Look at the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Article: How to Measure for Trailer Hitch Drop


Glenn
1/2/2025
How much deflection will I get on a 3500lb trailer springs from empty to when maximum load at 3500 trailer is about 600lbs also how much clearance will I need for fenders above tires