See what our Experts say about this Fulton Trailer Fenders

• How to Choose Correct Boat Trailer Fenders
  I didn't receive any information about your boat trailer, but I can explain how we classify them for you, which hopefully will help you to decide which fenders you want to go with. If you're only looking to replace one fender, unfortunately we have no way of looking up which exact fenders your boat trailer left the factory with. You might need to go with 2 fenders so they'll match. We classify the fenders according to the wheel diameters they're compatible with. For instance, the Fulton #...
  view full answer...
  
• Measuring to Determine Correct Replacement Trailer Fender Size
  The Fulton Single Axle Trailer Fender # F008583 also comes in white, # F008573 and silver, # F008593. The mounting bracket slots are 28 inches apart inside to inside. This measurement will matter more than the overall length of 40 inches. If you find you need the larger size for 14 inch rims the parts are: Black # F008584-2 White # F008574-2 Silver # F008594-2 The fenders for 14 inch rims are sold as a pair. The mounting brackets are spaced 30-1/4 inches apart inside to inside.
  view full answer...
• Replacement Fender for Shorelander Boat Trailer SRV1724
  Thanks for the information regarding your boat trailer, I was able to look up the tire size of your trailer in order to determine an appropriate replacement fender. I found that the trailer tire specified for your trailer was listed as a ST185/80R13. Therefore the trailer wheel is a 13 inch wheel with an approximate overall diameter of 24.4 inches. If your trailer tire is not this size please feel free to reply with an updated tire size and I can make additional recommendations for you....
  view full answer...
• Replacement Fenders for Boston Whaler Magic Tilt Trailer BWT-5000-TDB10-78-ST-R
  Hey Alex, it looks like the fender your trailer has on it currently is the Fulton part # F008593 which also matches the 13 inch tire size I believe your trailer has as well. We don't have that metal bracket that's goes between your two fenders that got bent too though.
  view full answer...
• Replacement Silver Trailer Fender for 2003 Karavan Single Axle Boat Trailer
  Hey Mike, we have just what you are looking for with the Fulton Single Axle Trailer Fender part # F008593 which is silver in color, is 40 inches long front to back, and has the three steps you mentioned as well. What do you think caused the blow out?
  view full answer...
• Looking for Replacement Fenders for 1999 Spartan Boat Trailer
  I don't have a fender that exactly matches the dimensions you provided, but the Fulton fender, # F008583 for black, # F008573 for white and # F008593 for silver come pretty close. The fender is 9 inches wide, 12 inches tall and 40 inches long, as you can see in the provided diagram. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets.
  view full answer...
  
• Replacement Fenders for a 2003 Triton LT WC-II Jet Ski Trailer
  The M1 measurement on Fulton fender # F008592 is 22.7 inches which is less than 5/16 inches shorter than your 23 inch measurement. Basically, your fenders could have spread out a little over time or if they get warm and pliable so they could have started out slightly shorter. If the 22.7 inches just won't work you will need to go up to the next size, # F008593, which has an M1 measurement of 28 inches. I have linked a video review for you. The fenders can be used on the left or right side...
  view full answer...
• Replacement Fender for 2005 Lowe Boat Trailer
  I was able to find some photos online for a 2005 Lowe Boat Trailer and it looks to use the Fulton Single Axle Trailer Fenders with Top and Side Steps like part # F008593. I am not sure which exact size or color you need but I have attached a full list of options below you just need to know the wheel diameter and color.
  view full answer...
• Fender Compatible With 13 Inch Wheels On Shorelander Trailer Carrying 18 Foot SEA-ARC Boat
  I have provided a link of the fenders that will work with your existing trailer and a 13 inch tire size. Several of these fenders provide areas that are intended to mount lights but none have lights that are included with the fenders. For your trailer I recommend the Fulton Single Axle Trailer Fender with Top and Side Steps, this comes in 3 colors white # F008573, silver # F008593, and black # F008583. The dimensions of this fender are 9 inches wide by 40 inches long by 12 inches tall....
  view full answer...
• Replacement Fender for 1990s Shorelandr Trailer
  The closest fender option we have available to the dimensions you provided is the Fulton Single Axle Trailer Fender - Silver # F008593. This model is also available in Black # F008583 and White # F008573. This high-density polyethylene fender measures 40 inches long, 9 inches wide, and 12 inches tall. There is a distance of 28 inches between the mounting bracket slots, inside to inside. It does feature a front, rear, and top step, along with a built-in fender skirt. I have attached...
  view full answer...
• Recommended Replacement Trailer Fender Bracket for Escort Boat Trailer
  I was able to find photos of Escort single-axle boat trailers with the top/side step fenders. The fenders that we offer that have top/side steps are all plastic units which can be seen on the link provided. Installation brackets are not included with any of these but we do offer general-purpose fender brackets. Unfortunately there is no way to know the exact ones originally installed on your trailer. You can simply enter the phrase 'fender bracket' into our search box to see all available...
  view full answer...
• Fulton Plastic Fender F008593 Mounting Brackets
  The mounting brackets you can use for the Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 13" Wheels # F008593 are the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair) # PF1135-BKT-2.
  view full answer...
  
• How to Choose Fenders for a Utility Trailer
  When choosing a fender for your trailer there are a few different factors that need to be considered. The first is what size wheels do you have followed by what kind of space are you looking at. For example, the Black Fulton Single Axle Trailer Fender with Top and Side Steps # F008583 is compatible with 13" wheels and has overall dimensions of 9" wide x 40" long x 12" tall. I have attached a picture with more specific measurements that you can check out. This fender also comes in White...
  view full answer...
  
• How to Choose Correct Replacement Fenders for 1996 Spartan Boat Trailer
  Since Spartan went out of business I wouldn't be able to get an exact part number for you but I can help you find a replacement. When it comes to choosing the correct replacement fender a lot of it depends on what size wheels you are using and what kind of space you are looking at. For example, the Fulton Single Axle Trailer Fender with Top and Side Steps # F008573 that you referenced is compatible with a 13" wheel and measures 9" wide x 40" long x 12" tall. I have attached the dimensional...
  view full answer...
  
• Locating Replacement Fender for 1989 Escort Boat Trailer
  We do have a large selection of trailer fenders available. I have attached a link that will take you directly to our selection. Unfortunately trailer manufacturers don't typically keep a good record of parts like these that are installed at the factory, so your best option for finding a suitable replacement is by taking a few measurements on your existing brackets and making sure the new fender is compatible with your wheel size. For example, the Fulton Single Axle Trailer Fender # F008593...
  view full answer...
  
• 1989 Escort Trailer Fender Recommendation
  If the Fulton Single Axle Trailer Fender # F008593 that you referenced is the style of fender you are looking for it should work well based on the dimensions you said you need. The length of the fender without the step portions is 28", the width at the bottom is 9", and the overall height is 12 inches. I attached a review video for you to check out as well.
  view full answer...
• Recommended Fenders for 13 inch Trailer Wheels
  We have a large selection of trailer fenders that are designed to fit 13 inch wheels like those on your newly obtained and cost-friendly trailer. I have attached a link that will take you to our available selection that will work on your trailer for you to look through. You will simply look for a style or color based on your personal preference. If you are needing to match a fender that is already installed on the trailer, you can check the pictures as well as the listed dimensions for...
  view full answer...
• Do I Need Mounting Brackets for Fulton Plastic Trailer Fender with Top and Side Steps
  Yes, the Fulton Plastic Fenders, item # F008593, will require a mounting bracket. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use L brackets to mount the fender to your trailers frame. These fenders can be painted but will require surface preparation for the paint to adhere. The paint used will need to be a flexible bumper style paint so that flexing and movement of the polyethylene material does not cause the paint...
  view full answer...
• Availability of 13 Inch SIngle Axle Trailer Fender
  Yes, take a look at Fulton Single Axle Trailer Fender with Top and Side Steps # F008593. The fender is 9 inches wide, 12 inches tall and 40 inches long. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets. I have included a video review of this fender for you to check out.
  view full answer...
• Finding Replacement Fenders For 2000 Easy Loader Tandem Trailer With 38" Long Fenders
  Hey Joseph, what size wheels do you have? It would probably be a good idea to go ahead and email your sketch and a picture of your trailer setup since there are lots of options. It looks to me like you need 4 single plastic fenders, but I don't see anything in that exact size. The closest I see is Fulton Single Axle Trailer Fender # F008593 which is 40" overall, close to your 38", with a wheel well gap of 28-30" roughly, and is for 13" wheels. You can email photos to the email address you...
  view full answer...
• Availability of Silver Trailer Fender with Around 26 inches Between Mounting Bracket Slots
  The closest fender we have to what you are looking for is the Fulton Single Axle Trailer Fender # F008593 which is silver, has a step on top of it and has 28 inches between the mounting bracket slots. That's as close to 26 inches as we have. I attached a review video for you to check out as well.
  view full answer...
• Can You Paint the Fulton Plastic Fender F008573?
  Painting the Fulton Fender # F008573 is definitely a possibility, but you will need to make sure the paint you are using is rated to be used on polypropylene, polyethylene, ABS, and other types of plastics, as not all are. It is also a good idea to give them a good sanding and primer before the final coat is applied. That being said, we do also have this exact Fulton fender in black, # F008583, and in silver, # F008593. Not sure how much the silver would go with a blue trailer, but black...
  view full answer...
• Is Fulton Single Axle Trailer Fender F008593 For The Driver Or Passenger Side Of Trailer?
  The Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 13" Wheels - Qty 1 # F008593 you ordered is not specific to which side it is installed on and as such be used as a driver or passenger side fender. I included a video of the # F008593 for you to take a look at.
  view full answer...

Do you have a question about this Trailer Fender?