See what our Experts say about this Fulton Trailer Fenders

• Larger Replacement for a 4.80-12 5-Lug Trailer Tire and Wheel
  I have several options to upgrade 4.80-12 wheel/tires on a trailer without replacing hubs, ranging from 13" - 15". The best option will really come down to how much space you have available and this will be different for each trailer. The Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel part # AM31952 would be a good option assuming you have the correct amount of space for the 24" diameter x 7" wide dimensions. If you need larger fenders to accommodate this new size, the...
  view full answer...
  
• How to Mount the Fulton Plastic Trailer Fenders
  You can mount the fenders directly to the trailer frame through the fender skirt on the back of the fender. I would recommend using large washers if you drill through the fender skirt and attach the fender directly to the trailer frame. If mounting directly to the trailer frame is not possible on your trailer, you will need to use brackets to attach the fenders. We have the Galvanized Steel, L-Shaped, Bolt-On Brackets, item # PF775-BKT-2, that could be used to mount these fenders, # F008543,...
  view full answer...
• Recommended Trailer Fender for 2012 Little Guy Joey Trailer
  The Fulton Single Axle Trailer Fender with Top Step # F008563 referenced in your question does have extremely similar dimensions to the current fender on your Little Guy Joey Trailer. The fender measures 29-1/4 inches long, 9 inches wide, and 12 inches tall so it should work great as a replacement around your 13 inch tires. Customers usually use existing mounting brackets to install the new fenders but in your case I recommend adding some L-shaped brackets like # PF775-BKT-2. One end of...
  view full answer...
  
• Replacement Plastic Trailer Fender for a Venture Boat Trailer
  The Fulton plastic fenders like # F008543 are considered more universal than direct replacements though some trailers come equipped with them. So you will need to go by the measurements on the product page which you have mentioned and re-use the mounting hardware from the old fender. This same style and size is also available in black, # F008553, and silver, # F008563.
  view full answer...
• Recommended Replacement Fenders for 1994 Ranger Bass Boat Trailer
  Trailer fenders are sized according to the diameter of the trailer wheels. The Fulton # F008543 fenders you'd looked at are for a 13 inch wheel, so I'll assume that's what you have. If your wheel diameter is different, let me know. I'd recommend the Redline # PF11X35W-2 fender kit which includes the driver's and passenger side fenders as well as the mounting brackets that are designed to sit under the steps and provide reinforcement. The fenders fit 13-15 inch trailer wheels and can be...
  view full answer...
  
• Replacement Fenders for 1988 17 foot long Escort Boat Trailer
  Since we don't carry a fender that exactly matches the dimensions of your existing fender, replacing both fenders would be your best bet. We do have some steel, aluminum and plastic fenders that are pretty close in size, even though they're not an exact match. CE Smith offers a pre-galvanized fender, part # CE17800G that is 27-3/8 inches long by 8 inches wide by 11 inches tall. They also offer a fender in aluminum diamond plate, part # CE17960ATB which measures 28 inches long by 9 inches...
  view full answer...
• Replacement Fender for Shorlander Double Jet Ski Trailer
  Based on the picture you sent in of your double jet ski trailer, it looks like the closest match for your existing fender is the Redline Plastic Single Axle Trailer Fender with Top and Side Steps, White # PF11X35W. This fender is designed to fit 13 inch wheels and measures 11-5/16 inches wide x 45 inches long x 13 inches tall. For a pair of these fenders you can use part # PF11X35W-2. Another close option is the Fulton Single Axle Trailer Fender with Top Step, White Plastic # F008543....
  view full answer...
  
• Can Fulton Single Axle Trailer Fender with Top Step be Used for Both Left and Right Sides
  The Fulton Single Axle Trailer Fender with Top Step - Black # F008554 or Silver # F008564 for 14 inch wheels, or Black # F008553, Silver # F008563, or White # F008543 for 13 inch wheels are symmetrical so they can be used on either side of the trailer. Check out the pictures that some customers sent in where they used the same fender for both sides.
  view full answer...
• Recommended Trailer Fenders With Steps For Bass Boat Trailer With 13-Inch Wheels
  I have attached a link to our trailer fender product page you can check out. We have fenders with the step on top of the fender like part # F008543 in white or part # F008553 in black. We also have fenders that are white with top and side steps like part # PF11X35W-2 for single axle trailers. This includes 2 fenders with mounting brackets. For black fenders with top and side steps I recommend part # CE19503-2. I also recommend the mounting brackets, part # CE26098G-2 to attach...
  view full answer...
• Replacement Fender Recommendation for Venture 44300 Trailer Fender
  Thanks for giving me the Venture part number. With that I was able to determine exactly which fender we offer that would work best for you. The Fulton fender part # F008543 would be an exact match and would work well for you.
  view full answer...
• Recommended Trailer Fenders for New 175/0-13 Tires
  The Fulton Single Axle Trailer Fender part # F008543 is a great option for 175/80-13 tires. It will likely require new brackets as well, the Mounting Brackets for Trailer Fender part # CE26098G-2. I have attached our list of trailer tires below. Please note, you cannot use P tires on a trailer since they are for passenger cars and can't take the load from a trailer.
  view full answer...
• Would the Fulton Trailer Fender F008543 Fit a Shorelandr Trailer with 13 inch Wheels
  Yes, we had a customer send us in a picture of their Shorelandr trailer with 13 inch wheels and we found that the Fulton Trailer Fender part # F008543 would work for it. It measures 9 inches wide x 29-1/4 inch long x 12 inches tall. I have attached a review video of this fender for you.
  view full answer...
• Plastic Fender And Lights Recommendation For Tow Dolly
  We do offer plastic fenders that may work for your tow dolly but the fenders do not come with lights pre-installed on them. The fenders we offer are for single axle trailers and we have a couple of sizes available. They will fit for both the left and right side of the trailer. For 8 to 12 inch wheels I recommend part # F008541. These have a top step, and have a 300 lb weight capacity. For 13 inch tires I recommend part # F008543. Since these do not come with lights pre-installed you...
  view full answer...
• Replacement Fender for 1999 Bayliner Trailer with 13 inch tires
  We do not have an exact replacement for your trailer fender. We do have the Fulton Plastic Fender with Top Step, White for 13 inch Tires, F008543. This step is 9 inches wide by 29-1/4 inches long and 12 inches tall and the color is molded in to the fender so scratches do not show easily. We also have the Fulton Plastic Fender with Top and Side Steps, white for 13 inch Tires, F008573. This fender is 9 inches wide by 40 inches long and 12 inches tall and has the front, rear and top steps....
  view full answer...
• White Fender Similar To Fulton Fender part # F008554
  For a very similar fender as the # F008554 that you referenced in white you would want the part # F008543. It's only a tiny bit smaller, it's dimensions are 9" Wide x 29-1/4" long x 12" tall. Check out the review video I attached as well.
  view full answer...

Do you have a question about this Trailer Fender?