1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this universal kit. Polyurethane air springs fit inside your coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.
Features:
Specs:
Heavy loads can cause the back of your vehicle to sag and add unnecessary stress to your suspension. This can affect your braking, handling, headlight aim, and even the wear on your tires. To improve your vehicle's ability to endure heavy loads, you need to add support to your existing coil springs.
Air Lift's 1000 Universal Air Springs fit inside your rear coil springs and have 1,000 pounds of load-leveling capacity. You can inflate and deflate these tough polyurethane helper springs as needed, ensuring the perfect amount of support for every load. It comes with manual inflation valves that are typically mounted on the bumper but can be installed anywhere on your vehicle for easy access. For even more convenience and control, you can add a compressor (sold separately), which will let you monitor and inflate your air springs.
If there isn't a specific Air Lift 1000 Air Spring kit for your vehicle, you can use a universal kit to get the support you need. However, you'll have to take a couple measurements on your rear coil springs to ensure you get the right fit. Also, this kit will not fit vehicles with coil-over shocks or coil springs with internal jounce bumpers.
First, unload your vehicle to make sure it's at normal ride height. Then, measure the inside height of your coil spring, which will be from the upper spring seat to the lower spring seat. Lastly, measure the inside diameter of the spring at its widest point. Once you have these measurements, use the table below to find the correct kit by matching up your diameter and height values. Since the air spring cylinder will inflate, it's okay if the cylinder is slightly undersized compared to the size of the coil spring. The spring pitch will also indicate the total air pressure the bag should hold. This measurement is the distance between the coils. The bag can hold 50 psi if it is less than 1" and 35 psi if it is greater than 1". Additionally, some kits include spacers to make up for any height differences.
This page's kit is in bold text.
| Kit Part Number | Minimum Diameter | Maximum Height |
|---|---|---|
| 60900 | 3" | 5-1/2" |
| 60901 | 3" | 8" |
| 60902 | 3" | 9" |
| 60903 | 3-1/2" | 5-1/4" |
| 60904 | 3-1/2" | 7-3/4" |
| 60905 | 3-1/2" | 9-1/2" |
| 60906 | 4" | 5" |
| 60907 | 4" | 6" |
| 60908 | 4" | 7" |
| 60909 | 4" | 8" |
| 60910 | 4" | 9" |
| 60911 | 4" | 10" |
| 60912 | 4" | 11" |
| 60913 | 4" | 12" |
| 60914 | 4-1/2" | 6-1/2" |
| 60915 | 4-1/2" | 7-1/2" |
| 60916 | 4-1/2" | 9" |
| 60917 | 4-1/2" | 10" |
| 60918 | 5" | 5-1/4" |
| 60919 | 5" | 7" |
| 60920 | 5" | 9" |
| 60921 | 5" | 11" |
| 60922 | 5-1/2" | 5-1/2" |
| 60923 | 5-1/2" | 7-1/2" |
| 60924 | 5-1/2" | 8-1/2" |
| 60925 | 5-1/2" | 9-1/2" |
| 60926 | 5-1/2" | 10-1/2" |
| 60927 | 5-1/2" | 11-1/2 |
California residents: click here
This air spring kit leveled our RAV4 just the right amount. We towed a LivinLite 8.1 all over the western US with no issues. The install takes a bit of effort (and do be sure to measure carefully if using a universal fit), but once in it was easy to set the pressure and I had no troubles with leaking. I ran the air valve to the side of the hitch to keep it out of the way.
They installed, they work & the customer service was good.
The airlift system works very well. I installed a leveling kit on my truck. Even with a small load in the bed of my truck, the truck showed sag. With the airbags, I can inflate to the desired height before I load the bed and it doesn't appear to squat!
I want to thank you very much for the help on fitting the correct air lift bag for my mopar lifted wrangler. I spent countless hours searching the web unsuccessfully for the information you provided. The new listing you added on your site for fitment of these air bags will undoubtedly help many customers the same as it helped me. etrailer has been my go to site for many of the items needed for an offroad teardrop camper build I'm working on that is towed by the wrangler, and again you guys came through for me. There aren't many suppliers on the web that offer the assistance you have. I will continue to recommend etrailer to people I know and meet that want a supplier with excellent service to the customer.
Thanks again!
its been a year of using the lift kit on the Jeep Wrangler Rubi (4door). no issues. did replace the clips with tighter fitting clips.
not much else to say. works as advertised.
They work great they stopped the SAG
Works great , I put a Bluetooth compressor with it.
What a great product, I use one of these kits,I don’t know 10 years ago and thought I would come back to the company because they provided such a good quality 10 years ago and again it never fails. Put them in my grand Cherokee yesterday. And they are working perfectly today. Great product perfect. They sent extra stuff with it that I didn’t even need which is always a nice touch. Thanks for making such a wonderful product.
This is the second time I have ordered different items from etrailer and each time people that helped me have been extraordinary. I wish I saved their names to thank them personally. I waited to write this review because I had to wait to have my Air Lift 1000 kit installed. I am as satisfied with the results as I am with your employees. I will definitely order from etrailer again and will highly recommend you to everyone I know.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.












Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.