Gen-Y Hitch Trailer Hitch Ball Mount
- 325-GH-623
- Adjustable Ball Mount
- Fits 2-1/2 Inch Hitch
- Drop - 6 Inch
- Rise - 6 Inch
- Two Balls
- Built-In Pintle Hook
- Stacked Receivers
- 21000 lbs GTW
- 2 Inch Ball
- 2-5/16 Inch Ball
- Gen-Y Hitch
- Steel Shank - Gray
Insert this heavy-duty mount into your 2-1/2" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.
Features:
- Adjustable ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into hitch receiver on your vehicle
- 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
- 3 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
- 2 Pins included to secure accessories to shank
- Adjustable height lets you tow trailers of different heights with the same vehicle
- Drop ball mount lower or raise it higher to match your application
- Heavy-duty steel construction
- Zinc primer and powder coat finishes resist corrosion
- Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
- SAE J684 certified
- Made in the USA
Specs:
- Application: 2-1/2" x 2-1/2" trailer hitch receivers
- Built-in receiver size: 2-1/2" x 2-1/2"
- Maximum drop: 6"
- Maximum rise: 6"
- 2" Ball capacity:
- Gross towing weight: 16,000 lbs
- Maximum tongue weight: 1,500 lbs
- 2-5/16" Ball capacity:
- Gross towing weight: 21,000 lbs
- Maximum tongue weight: 3,000 lbs
- Overall height: 9-1/2"
- Total length from center of pin hole with included ball mount installed: 13-1/4"
- Total length from center of pin hole without ball mount installed: 10-1/4"
- Distance from center of pin hole to first weld on shank: 4"
- Distance from center of pin hole to base of receivers: 5-5/8"
- Hitch pin hole diameter: 5/8"
- Distance between pin holes: 1"
- Accessory pin hole diameter: 5/8"
![dimensional diagram]()
Multiple Stacked Receivers for Easy Adjustment
![stacked receivers]()
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
![pintle hitch]()
Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.
![How to Measure Drop on Adjustable Ball Mount]()
GH-623 GenY Hitch Adjustable Versa Ball Mount with Pintle Lock for 2.5" Hitch Receivers - 6" Drop/Rise - 21,000 lbs
Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.