Recommended Hitch Reducer from 2-1/2 Inch Hitch to 2 Inch with 5 or 6 Inch Drop for 2016 Ram 2500
Updated 04/23/2019 | Published 04/22/2019 >
Products Featured in This Question
Question:
2 1/2 to 2 down reducer 4 This product is for my 2016 2500 RAM with a 2 1/2inch hitch. Do you make this same product in a 5inch or 6inch ? Also, what flat towing mean? Thanks
asked by: Eddy
Expert Reply:
A high-low adapter like the Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW # RM-058-4 is designed for use when flat towing which is pulling a vehicle behind a motorhome. The reason an adapter is needed is because tow bars that connect the vehicles need to be within 3 inches of level for safety. I've attached an article to assist.
It sounds like you are looking for something for the back of your truck that allows for a drop for towing or accessories. If this is the case you may want to consider the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K # 325-GH-623 or # 325-GH-924. This will allow you to use a ball mount, weight distribution system, or accessory in any of the receiver tubes. You can tow with one and use an accessory in another at the same time if desired as long as the tongue weight of your vehicle or trailer hitch is not exceeded. You will need reducer sleeve # BWRHXA2182 for most accessories. Your other option is to use the reducer first and then use # 325-GH-503 or # 325-GH-404.
If you just want a ball mount compatible with your truck trailer hitch, I've linked the page to all your options to assist.
With these options I recommend the locking hitch pin # e98881 or # e98882 to secure your investment. These can be keyed alike to assist.
Product Page this Question was Asked From
Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW
- Hitch Adapter
- High-Low Adapter
- Tow Bars
- Fits 2-1/2 Inch Hitch
- 4 Inch Rise/Drop
- 10000 lbs
- Roadmaster
more information >
Featured Help Information
Miscellaneous Media








Continue Researching
- Shop: Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 5" Drop/Rise - 16K
- Q&A: Roadmaster Hitch Extender Clearance for Flat Towing with Bike Rack
- Q&A: Replacement 85" HF to HF Trailer Axle and 5 on 5 1/2 Hubs for Pontoon Trailer
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Dimensions Of Roadmaster Dual Receiver Hitch Adapter RM48BQ
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does etrailer High-Low Fixed Adapter Have Tongue Weight Rating
- Q&A: Recommended Front Hitch for a 2024 Ford F-350 Cab and Chassis Dually
- Article: How Level Should a Tow Bar Be When Flat Towing
- Q&A: How Can I Go From a 2 1/2" receiver to a 2" with a 2" Drop for Motorcycle Carrier?
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Wiring Diagrams
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: How to Choose a High-Low Adapter

