Part Numbers: SS98GV,31313
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out.
Features:
Specs:
Snowplow Installation
Front or rear mount? Versatility is the SnowSport LT's middle name.
Installation is quick and simple - just slide the included shank assembly into your 2" hitch receiver and secure with pin.
Once the plow frame is connected, attach the blade by lifting one end at a time onto the frame's holders. The lightweight aluminum blade construction makes lifting or adjusting an easy, one-person job. Secure the blade in either the transport or plowing position with the plow's snap pins. The low-profile design won't block your headlights, and the transport position is secure enough for highway travel.
If using with a rear-mount receiver, simply lower the blade to plow position and back up as usual. For a front-mounted plow blade, just drive forward with the blade in the plow position. The unique design takes the hassle out of plowing: This device has no hydraulics or complicated wiring. The push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.
When you are ready to reverse your driving direction, the blade lies back, skimming over the surface of the ground until you change direction again to plow.
Handy blade markers extend vertically from the ends of the plow to help you see where you are plowing.
With the SnowSport LT, plowing snow is as easy as backing out of your driveway. Once you are finished plowing, simply lift the blade, refasten it in the transport position and head off for work or errands.
California residents: click here
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Work great, was easy to install, instruction that it came with weren't great, but video online helped. Going to use it for a bike rack and Winch. There was some scratches on the hitch when I received it, I think you need to rethink you packaging, putting metal on metal and wrapping it Saran wrap just doesn't keep it from rubbing, I will have to touch it up. Thanks for the fast shipping.
I need to thank the team @ eTrailer. The original front hitch for my Tacoma that I ordered was out of stock for a few months (Covid), and I needed the hitch for a trip in a week and a half. The eTrailer team had a different manufacturers brand at my door step in 2 days. I assembled the parts in my living room to make sure I had all the hardware, and exactly where all the bolts/washers will go. I cant wait to install it tomorrow. eTrailer had the best price I could find and delivered me the part in a very tight timeframe. eTrailer for the win!!!
Gregory
11/1/2021
Perfect. I attach a cooler and rod rack to the front of my vehicle for fishing. The rack is constantly loaded to and from the trailer hitch. After a year of abuse, its still not rusting I was pleasantly surprised. The trailer hitch on the back of the vehicle that came on the vehicle from the factory had rust by now on it. I would recommend.
My front hitch for my 2008 Tacoma got to me within 3 days very fast service. I installed it in 30 minutes and was able to put the front skid plate back on without doing any other changes to it. Very good product. I will be using it to put my rod rack on front of truck to use it at the outer banks of North Carolina for surf fishing this coming fall. Thanks for a very good hitch.
Mike H.
7/21/2016
The hitch has worked really well for me. My rod rack that I use hitch for was esay to install and remove. Very good product.
Installed the Curt front hitch on a 2006 Tacoma. Install time was approximately 45 minutes by myself - very straight forward installation; instructions were very clear. I did not have to remove the skid plate. I was concerned that the hitch would be low, but it sits higher than the lowest point of the skid plate.
Primary use will be to mount a bike rack when pulling a travel trailer. Does the job perfectly!
Customer service was above and beyond. I ordered this on Wednesday afternoon and it arrived Friday afternoon! Box arrived in good shape, hitch and all hardware were in perfect condition.
Just got my front receiver hitch today got it put on took me about 45 minutes to an hour to get it installed. etrailer really got this delivered quick. Thanks etrailer!!
Super fast delivery! Double boxed for security. Completed straight-forward installation by myself in about 40 minutes using routine hand tools (3/4" & 11/16" wrenches).
Standard curt hitch, should last about 5 yrs as the previous one did
Fit great!! Easy to install with some simple wrenches and sockets. Took approximately 45 min to mount. It arrived in 3 days and was packaged appropriately!!
I was a little surprised with the snow plow. I thought it was going to be hydraulic/electric. It does okay, going on flat and slight declines. Inclines not so good. I also. Bought a rear trailer hitch. Very pleased with it.
Fit, works, reasonably priced.
Added this hitch a yr ago - orginal intent was to install a bike hitch rack on front ( works great as long as it is day time! Bikes distort headlights do much so not as good as I was hoping. Second note it did save my front end in September when a deer decide it want to play chicken and jumped out in front of me- ended up cracking my bumper but pretty sure (don't ask) that the hitch prevented it from destroying my entire front grill- so certainly paid for it self then. Lastily it is really convenient for moving my trailer around when parking it- its short and kept in a really tight spot so being able to just push it in instead of backing it in makes it so much easier.
it's worked fine so far. Have used it to move my trailer and when not doing that I have my winch mounted on it which is the main reason I got it. super strong and looks good.
Rex A.
12/31/2021
very happy still using winch on it
Works great to make a tricky turn pushing my boat into the garage. Much better visibility and maneuvering than trying to back up.
Works exactly as stated and provides a nice 2” receiver style hitch on the front end of the truck! I would have preferred a more discreet under mount but knew prior to install that it would be as pictured. I use mine with a hitch-mounted winch so that I can pull from both front and rear, depending on situation! No complaints and I would buy again!
The front hitch makes it easy to push my off-highway teardrop trailer through a gate at an angle and into a storage shed. The hitch came with complete instructions for my 2006 Toyota Tacoma. I was able to install with no assistance. I used a floor jack to position the hitch, and the process took me 45 minutes .
I am not an automotive person. I was very leery about attempting this project. I called etrailer to confirm that I had selected the correct hitch receiver. Customer service was very helpful and I placed my order over the phone. I was told that there might be a delay in shipping due to back order. I received update emails and the product arrive earlier than promised. Installation instructions are clear, an online video is available. Installed hitch receiver on my 2009 Toyota Tacoma by myself. No exotic tools required. I would not hesitate to purchase from etrailer again. Oh, great price too!
Easy to install. Even able to put by bull bar back on. Strong and sturdy. The striper are going to dread seeing me pull up.
Eric M.
5/9/2015
Still like brand new
Great hitch, solid construction, fits perfectly, great value. This is actually the third Curt front mount hitch that I have bought and installed on my Toyota pickups over the years.
i had looking for a front mount trailer hitch for my 2009 toyota tacoma came across the web page ordered the unit with no problems it showed up a few days later due to the weight of the hitch it was delivered by ups with the box completly busted open but no damage so who cares. i installed it today very nice install very straight forward i am planning to customize the skid plate along with my front light bar to fit on the hitch took about an hour to install. the unit is overbuilt for what i need it for. more than enough to hold my front mounted cooler and rod holders for surf fishing photos to follow> will buy from this company again,and again, thanks again andrew r milton mass
I had self inflicted doubts about this product but Ashley was professional and timely in setting me up with a technician wor was able to direct me for proper installation.
All Hardware was present. Electric Harness installation went well after I had difficulty separating stock plug for harness plug in. Removed Bumper for more room to view. I suggest a helper to position assembly up in place. I was going to use a floor hydraulic jack to get er done. A friend just came by. Had to purchase a 19mm box/open end wrench to tighten 2 bolts. Deep sockets will not get in there.
Now for the front hitch.
Cheers dlj
Great front hitch. Took about 35 minutes to install on 2012 Toyota Tacoma with just a few wrenches. The hardest part was getting the plastic hole plugs out of the holes to use to mount the hitch to the frame.
For my 2012 Double Cab Tacoma.
Arrived to my home as predicted. Easy to install, removed the skid plate but able to re-install it afterwards. Looking forward to using it.
Richard A.
5/15/2015
Did you have to modify the skid plate in anyway for the skid plate reinstall?
Yadayadayada
5/19/2015
No modification needed or required to fit on my 2012 Tacoma DCSB off road package
Looks well made. Received promptly from eTrailer as promised. Haven't been able to mount it yet as the hardware package from Curt was incorrect. Still waiting for a replacement bolt.
This was the second CURT product I purchased, and was (is) equally impressed. ALL washers, nuts, bolts, etc were included as promised. Fit was also as promised; no drilling, bending, forcing or other muscle power required. Kind of hard to believe; didn't even skin a knuckle. Thanks. Bill
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
5/10/2023
Awe, I am sorry that it arrived in that condition. I would recommend using a rust-oleum type of paint to prevent any corrosion.
Helpful Links
faq-rust-prevention-maintenance.aspx