Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex

Alex

Blowing Rock, NC


AMG


A/M/G creates unique collegiate, flags and military hitch covers to suit your personal taste. Each cover is created with a sleek black base and topped with an American-made emblem.

  • Black powder coated metal cover with chrome-plated metal emblem
  • Emblems are American-made, rustproof and rattleproof
  • Lockable with a hitch lock
  • Sleek, stylish design for every team loyalty





AMG Reviews and Installation Videos


See all AMG videos >>

Expert Answers about AMG

  • Availability of Rubber Cover that fits Over Entire Hitch Ball
  • We have covers that will fit over the entire hitch ball and shank, though at present we do not have covers that will fit over the mount. If your hitch ball has a 2-5/16 inch diameter we have # 42251. For a 1-7/8 inch and 2 inch diameter hitch ball there is # 42250. These units slide nicely over the ball and covers the whole thing. The fit is good and it stays on until you take it off.
    view full answer...

  • How to Use a 2 Inch Trailer Hitch Cover in a 1-1/4 Inch Trailer Hitch Receiver
  • All of the hitch covers for Rice and Rutgers are for 2 inch trailer hitch receivers. But do not worry, you can still use any of them in a 1-1/4 inch hitch as long as you use an adapter like # HTAD. This unit has a 1-1/4 inch shank but a 2 inch receiver allowing you to use a 2 inch hitch cover. For Rutgers we have # AMG100468 that you have referenced. For Rice we have # HCC2447, and # AMG100475.
    view full answer...

  • Availability of an Oregon State Beavers Trailer Hitch Cover
  • We carry just the one Oregon State hitch cover, # AMG102561. with the Beaver emblem.
    view full answer...

  • Dimensions of Ohio State Hitch Cover for 2011 Honda Pilot
  • I walked out to our warehouse and pulled the Ohio State hitch cover # AMG100390, from our inventory. The Ohio State hitch includes a 3/16 inch thick foam gasket that sits behind the plate of the hitch cover to prevent rattling. From the back edge of the plate of to the center of the hitch pin measures approximately 2-1/2 inches. From the back of the gasket to the center of the hitch pin measures 2-5/16 inches. I have attached a picture showing these measurements. The Ohio State Cover...
    view full answer...

  • Will Hitch Pin Hole of Hitch Cover AMG100451 Line Up with Hitch on BMW
  • As long as your vehicle has a 2 inch trailer hitch installed on it the Penn State hitch cover part # AMG100451 is going to fit it well. The hitch pin holes will line up perfectly. I attached a help article on hitch sizes for you to check out as well.
    view full answer...

  • Need Locking Hitch Pin to Secure Hitch Cover for 2-Inch Hitch Receiver on 2012 Toyota Tundra
  • The 2012 Toyota Tundra calls for a 2-inch trailer hitch receiver. We offer a number of Texas- and Texans-themed hitch receiver covers for this 2-inch hitch size; examples of these can be seen using the product links provided. Any of these can be secured to the hitch receiver using a locking hitch pin. Some of the hitches supplied by Toyota are wider than typical and require a longer hitch pin lock. You can be certain of the fit by using an extra-long locking hitch pin. Dead Bolt lock,...
    view full answer...

  • Will State of Texas Chrome Emblem Hitch Cover, # AMGSTTXC, Fit a Ford F-250 Super Duty
  • If your Ford F-250 Super Duty has a 2 inch by 2 inch trailer hitch receiver opening then the State of Texas Chrome Emblem Hitch Cover, # AMGSTTXC, will fit. All you will need is a hitch pin to secure it in place. I recommend a locking hitch pin like Trailer Hitch Receiver Lock, # 7683, to deter theft of the hitch cover. Most F-250 pickups come with a 2 inch hitch, but some might have a 2-1/2 inch receiver opening. If you measure and find that you have a 2-1/2 inch opening, you can use...
    view full answer...

  • Fit and Compatibility of AMG Air Force Wings Hitch Cover # AMG102389
  • If your 2010 Lincoln MKX has a 2 inch trailer hitch installed on it then yes! The US Air Force Wings Trailer Hitch # AMG102389 will fit your hitch nicely. To secure this hitch cover in place you will need a hitch pin and clip # PC3 or a lock # 7683. If you need a hitch for your vehicle, I recommend the Draw-Tite # 75992. I have linked a Help Article to this page to show you how to properly measure your hitch for size.
    view full answer...

  • How Does Mississippi State Trailer 2 Inch Hitch Cover # AMG100321 Mount to Trailer Hitch
  • Yes, the Mississippi State Trailer 2 Inch Hitch Receiver Cover, item # AMG100321, attaches to the hitch with a 5/8 inch hitch pin. On the back of the cover there is a channel that slides in the 2 inch hitch and a foam rubber gasket to prevent the cover from rattling in the receiver. I would recommend a hitch lock to prevent theft of the hitch cover. The Trailer Hitch Receiver Lock - Flush Design for 2 inch Trailer Hitches, item # 7683, and the DeadBolt 2 inch Trailer Hitch Receiver Lock...
    view full answer...

  • Does the Texas Hitch Cover # AMGSTTXC Attach Using the Wire Clip
  • The State of Texas Hitch Cover you mentioned, part # AMGSTTXC would be secured in the receiver using a standard hitch pin and retaining clip like # PC3 or a locking hitch pin like # 40107. Although some of the hitch covers we offer use the wire arrangement you describe, this particular cover uses a piece of square tubing attached to the rear of the cover as shown in the photo I provided. Because hitch covers are frequently stolen, I would recommend going with the locking model.
    view full answer...

  • Fit of Michigan Logo Hitch Cover on 2011 Toyota 4Runner
  • As long as the 4Runner is equipped with a 2 inch receiver, and the top of the receiver has at least 3/4 inch of clearance above it, the Michigan Logo Hitch Cover should work great with your 2011 Toyota 4Runner. To secure the hitch cover into the receiver, you will need either a pin and clip, part # PC3 or a locking hitch pin, part # 40107. If you should decide to go with the locking hitch pin, do yourself a favor and write down the key number and keep it someplace safe. Replacement keys...
    view full answer...

  • Rattle Prevention Recommendation for Ohio State Hitch Cover # AMG100406 on 2011 Ford F-150
  • THE Ohio State University Hitch Cover # AMG100406 you are using on your 2011 Ford F-150 should have come with a foam gasket that would fit around the base of the cover on the back that would help prevent rattling while driving. If you have that gasket and need something more to prevent additional rattling, I recommend the Boone Outdoor Hardware No-Rattle Trailer Hitch Wedge # 93347. It wedges itself between the receiver and the hitch cover post to take up play and eliminate rattle, holding...
    view full answer...

  • Availability of a Texas Trailer Hitch Cover for a 1-1/4 Inch Receiver on a For Explorer Sport Trac
  • All of our Texas hitch covers are designed to fit 2 inch trailer hitch receivers. However, what you can do if you have a 1-1/4 inch receiver is to use an adapter. You can use Hitch Adapter, # 80303. The small end would go in a 1-1/4 inch receiver and the other end will accept a 2 inch hitch cover. I also recommend hitch locks to secure the cover to the adpater and the adapter to the hitch. They are parts # 7683 for a 2 inch hitch or # 5200 for a 1-1/4 inch hitch. I have included a link...
    view full answer...

  • Vanderbilt University Commodores Trailer Hitch Cover
  • The Vanderbilt Commodores cover # AMG100700 that we offer is only offered in the 2-inch size. We do not manufacture the hitch covers we sell but we do offer a wide range. Most of these are for 2-inch receivers but we do also have hitch covers for 1-1/4-inch receivers, just not a Commodores version. You could use the 2-inch hitch cover in a 1-1/4-inch hitch by adding a hitch adapter. MaxxTow # MT70032 converts a Class II 1-1/4-inch hitch to a 2-inch receiver opening that will accept the...
    view full answer...

  • How Thick is the Replacement Foam Gasket for AMG Hitch Covers
  • Foam gasket # AMG-FM is very thin. You are looking at 1/8 inch thick. This gasket only goes in this one size since it has a specific application, fitting AMG hitch covers. All of the foam gaskets we carry have specific applications but AMG-FM is the only one of its size. It has a 2 inch square opening.
    view full answer...

  • What Color is the U in the University of Miami Hitch Cover Part AMG100253
  • This particular Miami Hitch Cover is black and chrome. There is no green or orange. We do have a green and orange version, part # CTH6S.
    view full answer...

  • Will the Chrome Rust Or Fade On The AMG Hitch Cover, # AMG100185
  • The AMG Hitch Cover, # AMG100185, is a black powder coated hitch cover with a chrome-plated emblem. It is rustproof and the emblem is fade proof. This is a high quality hitch cover, so you should not have any problems with the chrome on this hitch cover. The only problems with any chrome plating is if there is damage to the chrome itself from being hit, which can cause the plating to crack and start peeling. It is recommended to wax the chrome once or twice a year to protect it from...
    view full answer...

  • Availability of 1-1/4 Inch Texas Hitch Cover to Fit on Volkswagen Tiguan
  • I have the Curt 1-1/4 Inch Chrome Hitch Cover, part # 5351, which has a plain front and will fit a 1-1/4 inch hitch opening. It may work depending on the size of your emblem adhesive part and the make of hitch you have on your vehicle. It may not fit some Hidden Hitch and Draw-Tite Class I hitches. To get the AMG State of Texas 2-Inch Hitch Cover, part # AMG102219, to fit in a 1-1/4 inch hitch receiver would require the use of the Brophy Hitch Adapter, part # HTAD. This part would...
    view full answer...

  • State of Texas Color Emblem Attachment to the Trailer Hitch Cover
  • The Texas emblem on the State of Texas Color Emblem 2 inch Hitch Cover, part # AMG102219 is just like a vehicle emblem, such as a Cadillac or Impala emblem. It is secured to the black background with a special kind of automotive adhesive, like auto manufacturers use to attach emblems.
    view full answer...

  • Recommended Locking Hitch Pin For Hitch Cover In 2 Inch Hitch On 2012 Acura MDX
  • The Virginia Chrome Logo Emblem 2 inch Hitch Cover, part # AMG100703 is designed to fit a 2 inch receiver like the Draw-Tite Max-Frame Trailer Hitch, part # 75614 you have on your 2012 Acura MDX. I took a measurement of the hitch cover for you and have attached a photo with the measurement noted. The center of the hitch pin hole on the cover is 2-1/2 inches from the back of the cover. This should fit your hitch just right. If you want to lock your cover to the hitch and deter theft I...
    view full answer...

  • Will the Oklahoma State University 2 in Hitch Cover fit the Factory Hitch of a 2012 Ford Expedition
  • Yes, this Oklahoma State University Chrome Logo State Emblem 2 inch Hitch Cover # AMG100444 that you referenced will fit the hitch on your 2012 Ford Expedition. The hitch on your vehicle will have a receiver opening that will measure 2 inches across. That is the exact hitch size that the # AMG100444 is designed to work on. You may also be interested in a Pin and Clip # PC3 to secure the hitch cover into your hitch. Or, since hitch covers are pretty easily stolen you may be interested...
    view full answer...

  • Ohio State University Illuminated Trailer Hitch Covers
  • We do stock Ohio State trailer hitch covers but not currently the lighted ones. The most popular Ohio State trailer hitch cover is # AMG100406 and will also fit 2-inch hitch receivers. Brutus approved! A great addition for this hitch is the receiver dead bolt lock # 7683. Enjoy your college tradition!
    view full answer...

  • Replacement Hitch Cover Gasket Recommendation
  • It sounds like you are looking for a replacement hitch cover gasket like the part # AMG-FM. This is designed to fit AMG hitch covers but depending on what you have could be trimmed to fit your hitch cover.
    view full answer...

  • What is the Trailer Hitch Pin Hole Diameter of the Iowa State Hitch Cover, # ISTHRC
  • The hitch pin hole on the Iowa State Hitch Cover, # ISTHRC, is 5/8 inch diameter which is the standard size on 2 inch trailer hitches. I have included a link to all of the Iowa State covers for you.
    view full answer...

  • Will A Non-Threaded Locking Pin Work With Bike Rack And Hitch Cover?
  • As a Wolverine fan myself, I must commend your taste in a hitch cover! The Michigan Chrome Logo Emblem 2" Hitch Cover as well as your Saris bike rack will work with a locking pin like the Trailer Hitch Receiver Lock - Stainless Steel Flush Design for 2" Trailer Hitch Receiver, # 40107, you mentioned. However, using a regular pin or a locking pin that isn't threaded will allow movement in your bike rack and hitch which can give you a clanking noise. You may want to consider a threaded...
    view full answer...

  • Depth of Hitch Pin Hole On LSU Hitch Cover
  • The hitch pin hole of the LSU Hitch Cover # AMG100246 is about 2-1/2 inches from the back of the front plate and about 7/16 inches to the back of the shank.
    view full answer...

  • Does The Ohio State University Hitch Cover # AMG100390 Include a Hitch Pin
  • The item you selected, Ohio State University Hitch Cover, part # AMG100390, does not include a hitch pin. You will need a 5/8 inch diameter hitch pin, part # PC3, which fits 2 inch receivers. For added security, I would recommend using a locking hitch pin like the Deadbolt hitch lock, part # 40107. Both the Hitch Cover # AMG100390 and hitch pins # PC3 and # 40107 will fit a 2 inch hitch. I have linked a video review of the Deadbolt hitch lock, part # 7683. Also linked are all of...
    view full answer...

  • What Class Hitch Does the University of Utah Emblem 2" Trailer Hitch Receiver Cover # AMG102578 Fit
  • The University of Utah Emblem 2" Trailer Hitch Receiver Cover # AMG102578 that you referenced is designed for 2 inch Class III hitches. For more information on hitch classifications check out the link I attached to the right.
    view full answer...

  • Availability of Metal Hitch Cover for University of Nevada at Las Vegas
  • We do currently offer a Nevada-themed hitch cover. Part # AMG102547 is an all-metal hitch cover featuring the Nevada Wolf Pack emblem in chrome plating over black powder coat. We continuously add new parts as they become available from our suppliers so please check back with us from time to time to see the latest hitch covers. I have included a link to our main page for all trailer hitch receiver covers.
    view full answer...

  • What Colors are Visible on the U of H Hitch Cover part # AMG100161
  • This Houston Chrome Logo Emblem # AMG100161 that you referenced has a black powdercoated background and then features the Houston overlapping U and H logo in chrome. There are no other colors on this hitch cover. You may also be interested in purchasing a Trailer Hitch Receiver Lock # 7683 as a theft deterent. I attached a review video for this product for you to check out also.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.