2000 Thor Vortex Travel Trailer RV Jack Pads

Hello Jason, Thanks for writing in. For your 2026 Forest River R-Pod 192, you'll need the SnapPad SnapJack SJ RV Scissor Jack Pads #SN32FR for the four scissor stabilizer jacks and the SnapPad TJ Trailer Tongue Jack Pad #SN77VR for the rounded…

Hey Robert! That Stromberg Carlson foot won't work but we actually do have the replacement SnapPad for your leveling system. The Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot #SP54FR is what you need. It works with…

Hey Robert! The SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet - Qty 4 #SN58FR are made specifically for HWH and Atwood 10" diameter foot pads, so I'd like to make sure that the leveling system…

They sure will Eric! The SnapPad SnapJack QD RV Stabilizer Jack Pads item #SN44VR are exactly what you need for the PSX2 stabilizer jacks. They're going to bolt right up to where the existing jack foot is and stay securely attached with the…

Hi Michael, I'd be happy to help with that. By the way, I love the Flying Cloud. The etrailer Electric Trailer Jack, Part #e33KV, is exactly what you need for your Airstream Flying Cloud 23FB. It has a 5,000 pound lift capacity, which gives you…

Hello Luc, thanks for reaching out. The SnapPad #SN44VR kit will not fit the HappiJac jacks used on a Lance 1172 truck camper. The #SN44VR is designed for Lippert PSX style trailer stabilizer jacks with 5-1/2 inch square feet, not the round corner…

Hey Cass, can you measure the feet of your 2024 StarCraft Super Lite? The SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet #SN39FR is designed to fit 5-1/2 inch square feet which might be what you have but I don't…

Hey Max. There's no database that shows me what pin box is on your Montana 305RL and Keystone doesn't list that information either. I'll need the information on the sticker that's attached to the brackets above your current pin box to…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

Hey Chris, thanks for reaching out. Yep, you sure can! I looked up your order history, and I see you got the 7" SnapPad EQ Compact Jack Pads #SP24FR4 from us back in 2022. Those come as a set of 4, but if you need just a single replacement pad,…

To check the pins on the vehicle side 7-Way, you can use a circuit tester or the volt meter. The circuit tester will show you if a signal is coming through on the pin you are testing while the volt meter will tell you that and how much voltage is…

Hey Mitch, thanks for reaching out. You’re right on target with your measurements. The SnapPad Mini Jack Pads #SN39FR, are made specifically for 5-1/2 inch square jack feet, so they’ll be a perfect match for the setup on your 2025 Trade Wind 23 FBT.…