Expert Review Video:
Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
800 Pound Tongue Weight
8000 Pound Towing
Weight Distribution Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Installation Notes:
No drilling required for installation
Requires temporary removal of bumper/fascia during installation
Tech Tip:
Installation requires the removal of factory crossmember or hitch, which will be replaced by this hitch for support and safety.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
800 Pound Tongue Weight
6000 Pound Towing
Weight Distribution Towing Capacity:
800 Pound Tongue Weight
8000 Pound Towing
Trailer Wiring:
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Requires temporary removal of bumper/fascia during installation
For vehicles with factory installed step bumpers only
With this hitch installed the step bumper is no longer able to be used as a towing point
Tech Tip:
Installation requires removal of the impact structure, which will be replaced with the hitch for support and safety.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
800 Pound Tongue Weight
8000 Pound Towing
Weight Distribution Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Requires temporary removal of bumper/fascia during installation
Tech Tip:
Installation requires the removal of factory crossmember or hitch, which will be replaced by this hitch for support and safety.
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I&…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
I bought class III hitch for my 98 MPV. If you are looking for the lowest price, this is the place. Installation is well documented in the enclosed instruction. The delivery was quick and communication regarding order status and tracking was in timely fashion. I'd recommend my friends to shop here for their towing needs.
Yiwen
Salt Lake City, UT