2018 Highland Ridge Open Range Ultra Lite Travel Trailer Trailer Hitch

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other accessory.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Features:

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Features:

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation

Features:

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

Installation Notes:

No drilling required for installation