2010 Ram Trailer Hitch

Change Make

Select Vehicle Model

--Select Model-- 1500 2500 3500 4500 5500 Dakota

   Go

Available Models for 2010 Ram Trailer Hitch

1500

2500

3500

4500

5500

Dakota

Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.

Hitch Accessories

Ball Mounts

Custom Fit Vehicle Wiring

Hitch Adapters

Hitch Extenders

Hitch Balls

Pintle Hitches

Trailer Wiring and Adapters

More Trailer Hitches

Base Plate for Tow Bar

Weight Distribution System

RV Hitches

Front Mount Receivers

Fifth Wheel Hitches

Gooseneck Hitches

ATV Trailer Hitches

Trailer Hitch Manufacturers

Draw-Tite Hitches

Hidden Hitch Hitches

Reese Hitches

Torklift Hitches

Curt Hitches

2010 Ram Accessories

Towing

2010 Ram Trailer Hitch

2010 Ram Trailer Wiring

2010 Ram Brake Controller

2010 Ram Fifth Wheel Hitch

2010 Ram Gooseneck Hitch

2010 Ram Front Mount Hitch

2010 Ram Towing Mirrors

2010 Ram Base Plate for Tow Bar

2010 Ram Vehicle Tow Bar Brake System

2010 Ram Vehicle Tow Bar Wiring

Cargo Control

2010 Ram Roof Rack

2010 Ram Tool Box

2010 Ram Ladder Rack

2010 Ram Tailgate

2010 Ram Truck Bed Extender

2010 Ram Vehicle Cargo Control

2010 Ram Headache Rack

2010 Ram Truck Bed Sliding Tray

2010 Ram Camper Tie-Downs

2010 Ram Truck Bed Bike Rack

Performance Accessories

2010 Ram Cold Air Intake

2010 Ram Air Filter

2010 Ram Exhaust

2010 Ram Suspension Enhancement

2010 Ram Transmission Cooler

2010 Ram Performance Chip Tuners

2010 Ram Vehicle Lights

2010 Ram Tire Chains

2010 Ram Throttle Body Spacer

2010 Ram Fluid Filters

2010 Ram Vehicle Sway Bars

2010 Ram Vehicle Snow Plows

2010 Ram Vehicle Engine Heaters

2010 Ram Off Road Lights

Vehicle Trim

2010 Ram Floor Mats

2010 Ram Tonneau Cover

2010 Ram Nerf Bars - Running Boards

2010 Ram Trim Kits

2010 Ram Vehicle Covers

2010 Ram Grille

2010 Ram Grille Guard

2010 Ram Bug Shield

2010 Ram Side Window Vents

2010 Ram Truck Bed Mat

2010 Ram Bumpers

2010 Ram Mud Flaps

2010 Ram Lamp Guards

2010 Ram Truck Tailgate Lock

2010 Ram Truck Bed Rail Caps

2010 Ram Truck Bed Tailgate Assist

2010 Ram Vehicle Tent

2010 Ram Vehicle Seat Covers

2010 Ram Replacement Mirrors

2010 Ram Windshield Wiper Blades

2010 Ram Wheel Liners

2010 Ram Battery Box Relocation

2010 Ram Windshield Covers

2010 Ram Vehicle Air Mattress

2010 Ram Truck Bed Camera

2010 Ram Tailgate Lift

2010 Ram Questions and Answers

• Replacement Control Panel for Leveling System on 1995 Fleetwood Motorhome
  
• We had another customer with a '94 Bounder in need of the same control panel for their Lippert Power Gear leveling system and Lippert was able to confirm that kit # LC359259 would work. I shared your photo with my tech contact there and he confirmed the item referenced above will work for you.
  view full answer...


• Installing Tekonsha Prodigy P3 Brake Controller on 2010 Ram 1500 with Factory Brake Controller
  
• The Tekonsha Prodigy P3 # 90195 Trailer Brake Controller is an excellent choice and the Plug-In Adapter # 3021-P is exactly what you need to install it on your 2010 Ram 1500. When you remove the factory brake controller on your Ram, it will activate a warning lamp on your instrument cluster. The only way to prevent or get rid of this light is to visit a local Ram dealer to have them reconfigure the TIPM (Totally Integrated Power Module) of the truck. You will want to wait until this...
  view full answer...


• Replacement Velcro for TruXedo Lo Pro QT Tonneau on 2010 Ram 1500 Short Bed
  
• You measured correctly and the Velcro strip you need for your short bed Ram's Lo Pro QT cover is part # TX1115174 which is 1-5/16-inches wide.
  view full answer...


• Trailer Hitch to Tow 5th Wheel Trailer w/1 Long Bed Ram or 1 Short Bed Ram with Gooseneck Hitches
  
• The only part of this that really complicates things is that the 2010 Ram 2500 is a short bed. Otherwise the Demco Recon # DM8550045 would be the ideal solution. Do you happen to know the brand of gooseneck hitch in your 1999 Ram 2500? If it happens to be a B&W gooseneck hitch then you could use the Companion slider # BWRVK3400 and you'd just need to put a B&W gooseneck hitch in the 2010 Ram using # BWGNRK1313. The short bed truck is going to require a slider hitch in order for you to...
  view full answer...


• Replacement Cover for TruXedo Lo Pro QT on a 2010 Ram 1500 5-1/2 Foot Bed
  
• The correct replacement tarp for the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover part # TX545901 that you have on your 2010 Ram 1500 with the 5-1/2' bed is the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover part # TX5459-CVR as long as you do not have the RamBox. If you do have the RamBox then the correct replacement tarp for the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover part # TX544901 that you have on your 2010 Ram 1500 with the 5-1/2' bed is the Replacement Cover...
  view full answer...


• Clean Replacement Lens for RV Porch and Utility Light # RVPL7CB
  
• The lens you are looking for is part # APL5CB which is the clear lens for the RV Porch and Utility Light # RVPL7CB.
  view full answer...


• Parts Needed to Install Curt e16 Fifth Wheel Trailer Hitch
  
• Since you have the universal brackets you will need to drill into the frame of your truck. I've attached the installation details for the Husky universal brackets # HT31563 for you. On page 7, it states to use the adapter kit # HT30665 for Dodge 1500 2009-2014. I've also attached an install video on a 2006 Dodge. The bracket kit is not the same because we used a custom kit, but some of the measurements will be, so the video might be helpful to you.
  view full answer...


• Piecing Together an E-Z Flex Equalizer System with 3 Inch Shackle Straps
  
• Dexter Heavy Duty Suspension Upgrade Kit # K71-358-00 is exactly what you need though on a tandem axle you would need 2 sets. E-Z Flex System # K71-652-00 does not use wet bolts to hang the equalizer part. It has grease fittings on top for that so you can just use a regular bolt. So you would use # K71-654-00 for the equalizers by themselves, 2 of kit # K71-358-00, and either reuse the hanger bolts you have or use 2 of # TRFA73Z916DLNZ or a similar bolt.
  view full answer...


• Rear View Camera Recommendation for Mounting On Back of Camper that Tows Trailer
  
• The Rear View Safety Wireless Camera part # RVS-155W that you referenced would be an excellent option for you as it has a 70 foot interference free range and 18 LED diodes for night vision as well. It also has a 130 degree viewing angle as well.
  view full answer...


• Recommended Fifth Wheel Installation Kit For 2010 Dodge Ram 2500 With Or Without Overload Springs
  
• You can tell if you have overload springs easily. Just take a look at your rear leaf springs, and if you see an extra leaf as shown in the attached drawing you have the overload spring option. The Reese Fifth Wheel Hitch, part # RP30047, will work with your 2010 Dodge Ram 2500. The difference would be in the installation kit. The custom installation kit like part # RP50140-58 will not work with gas engines and overload springs. If you find you do not have the overload springs, then this...
  view full answer...


• Recommended Autoslide Hitch for 2010 Ram 2500 Mega Cab
  
• Though an auto-slide hitch is not going to give you more front-to-back travel, it is extremely beneficial because of how simple it is to use and I highly recommend the auto-sliding Demco Hijacker # DM8550037 for your 2010 Ram 2500 Mega Cab. You can mount this hitch with the Underbed Rail and Installation Kit # DM8551005, which is a confirmed fit for your truck and has underbed rails so you can remove the hitch at any time and still have full access to your truck's bed. The Hijacker uas...
  view full answer...


• Best Gooseneck Hitch Recommendation for a 2010 Dodge Ram 2500 Short Bed
  
• The most popular gooseneck hitch we offer with other owners of 2010 Ram 2500s with 6 foot beds is the Draw-Tite Gooseneck # 9464-35. This is a great hitch that would be strong, safe and about as easy as a gooseneck hitch can be to install. I attached installation instructions and an install video for you to check out for more info. Since you have a short bed you may also want the gooseneck ball with offset part # 19308 to give you better clearance while turning.
  view full answer...


• Troubleshooting Valley Phantom Brake Controller
  
• Valley is no longer in business so there is nothing specific in regards to that brake controller we can offer. There is some troubleshooting you can do. Start by severing the blue wire a couple inches from the back of your controller. Then use a circuit tester such as # 40376 to test the end of the blue wire coming out of the controller. It should only have power when you apply the manual override; if it shows power at idle then there is an issue with the controller and it will need to...
  view full answer...


• Will Titan BrakeRite SD Adapter for Ford/Chevy Brake Controllers # T4845900 Work on 2010 Dodge 3500
  
• The Titan BrakeRite SD Adapter for Ford/Chevy Brake Controllers # T4845900 that you referenced is intended for use with Ford and Chevy OEM brake controllers but not those supplied by Dodge. It is quite common for our customers to choose to replace their OEM brake controller with an aftermarket unit such as the popular Tekonsha Prodigy P2 # 90885. Typically the performance and broad compatibility of this and similar controllers (that work well with both electric and EOH brakes) make them...
  view full answer...


• Function of Curt Echo Brake Controller When Used on Vehicle With Factory Integrated Brake Controller
  
• The Curt Echo Mobile Trailer Brake Controller # C51180 can be used on a truck that has the factory integrated brake controller. The Curt Echo will cancel out the factory controller and will take on the trailer braking functions when installed. It will not interact with the factory controller but rather will take over the braking functions.
  view full answer...


• Trailer Lighting Options for 1962 Airstream Undergoing Renovation
  
• The vehicle-to-vehicle taillight converter part # 118158 will do what you want: separate the Ram's combined stop/turn signals into separate signals that can be fed to separate stop and turn lights on your vintage Airstream. This converter will not work with a vehicle that has LED lights but it WILL work on a trailer that has this high-efficiency type lighting. Vehicles with LED lights use much lower power signals along with lighter-gauge wiring that would not be able to operate the...
  view full answer...


• Availability of B&W Universal 5th Wheel Base Rails for a 2010 Ram 2500
  
• If you already have the B&W Custom Mounting Brackets # BWRVR2600 and all of the hardware for your 2010 Ram 2500 then the B&W Universal Base Rails you need are part # BWRVR3210. These 2 kits makeup the whole custom kit # BWRVK2600 for your pickup. Please note that if you have used hardware it will need to be replaced as well since it is only meant to be torqued to specs once. If you don't already have a 7-Way connector in the bed of your Ram then I also recommend installing the part...
  view full answer...


• Front Axle Jounce Spring Kit for 2010 Ram 2500 4x4 Using Front-Mounted Hitch, Plow and Cargo Carrier
  
• We have just the kit you need for your 2010 Ram 2500's front axle to support your front-hitch-mounted cargo carrier and snow plow loads. The Air Lift AirCell Custom Helper Spring Kit # AL52211 is a confirmed fit on your Ram 2500 4x4. This jounce spring kit installs easily (no drilling and no air lines!) and requires no maintenance at all once installed. These microcellular urethane springs provide progressive resistance to match the load placed on them. They will stiffen and support...
  view full answer...


• Recommended Load Leveling Air Suspension for Towing with 2010 Ram 3500 DRW 6.7L Diesel
  
• Your 100 gallon tank will add about 840 lbs plus the tank weight when full. Whether you can pull a trailer or not is not the issue, but rather how big a trailer. According to the 2010 Ram Towing guide you will be limited to 13,400 towing. The older trucks even though big, are not able to tow what the newer models are capable of. For your air bags, I recommend the Firestone Ride Rite # F2701. They have a 7500 lb load leveling capacity to help your truck keep the headlights out of...
  view full answer...


• Recommended Trailer Hitch Receiver for 2010 Dodge Ram 1500
  
• Curt Manufacturing offers a few different high quality, made in America hitches for your 2010 Dodge Ram 1500. The right hitch for you will depend on what you'll be towing and how much it weighs. If a 6000 lb towing/ 600 lb tongue weight (maximum amount of weight that can safely be suspended from the hitch) will work for you, you can't go wrong with the Curt Class III hitch, part # 13333. For a higher capacity, 10000 lbs towing/1000 lbs tongue weight, go with the Curt Class IV, part...
  view full answer...


• Where is Brake Controller Install Harness in 2010 Ram 1500 with 7-Way
  
• Since your 2010 Ram 1500 has a round 7-way connector at the rear of it that means a brake controller like our best selling Prodigy P3 part # 90195 could easily install with the correct harness, part # 3021-P. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. I attached a picture that points out where it will be as well.
  view full answer...


• Sidewinder Pin Box Replacement Recommendation for a Lippert 1621 Pin Box
  
• If you have a Lippert 1621 pin box the # RP61420 that you referenced would work for you, but not the # RP61410 as it is designed to fit a different style pin box. I attached an install video for the # RP61420 for you to check out though, it would work well with your Draw Tite fifth wheel hitch as well.
  view full answer...


• Ladder Rack for a 2010 Ram 1500 that Will Allow Tonneau Cover to Install
  
• The key to picking out a ladder rack for a truck so that you can also install a tonneau cover is to go with one that installs through the top of the stake pockets in the bed rails so that a tonneau can fit between them. Instead of the K2 you would need something like the TracRac part # TH43003XT-000 if you have an 8 foot bed or the part # TH43003XT-501 for if you have a 6 foot bed. These will allow the install of a tonneau like the # TX546901 for if you have a 6 foot bed or part # TX548901...
  view full answer...


• Air-Lift Compressor Install Location on a 2010 Ram 2500
  
• My Air Lift rep has the same exact compressor kit on his truck (# AL25870), and he installed his compressor on the inboard side of the truck frame under the cab. If you have a 2 wheel drive 2010 Ram 2500 you would want the # AL88297 and for the 4 wheel drive model part # AL88295. Either kit will have more than enough air line for the job as this kit was designed specifically to fit your vehicle. To protect the lines you could use wire loom like part # 459075-1 sold by the foot.
  view full answer...


• Underbed Installation Brackets for Gooseneck Hitch On 2010 Ram 2500
  
• In order to find the underbed installation brackets compatible with the overbed gooseneck hitch you have, we will need to know the manufacturer of the gooseneck. If the gooseneck you removed from another truck is either the Curt Folding Ball # C-52 or Flat Plate gooseneck hitch # C65500, you can use the Curt Custom Installation Kit for Curt Overbed, Folding Ball Gooseneck Trailer Hitch # C61529. If your exisiting gooseneck is not a Curt hitch, I will be happy to find the correct...
  view full answer...


• Recommended Firestone Air Springs for 2013 Ram 3500 Crew Cab with Leaf Springs
  
• If your 2013 Ram 3500 Crew Cab is 4 wheel drive, then the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2705 are a confirmed fit as are # F2560. If you have a 2 wheel drive model, then you will want the Firestone Ride-Rite Air Helper Springs - Double Convoluted # F2579 springs instead. They will work with your leaf spring suspension perfectly as you can see in the installation video and the installation details. Air springs # F2701 will not fit your vehicle. I...
  view full answer...


• Will E-Flex Suspension System And Heavier Leaf Springs Stop Trailer From Bottoming Out
  
• The E-Z Flex suspension system like part # K71-652-00 will help absorb road shock and may be just what you need on your 24 ft Cargomate trailer. These equalizers measure 5-1/4 to 6-1/4 inches long (measured from the center of one eye to the center of the other eye). These include the bolts, shackle links and rubber equalizers. Upgrading to a heavier spring will normally make the ride a bit stiffer. The leaf springs we offer for a 5300 lb axle is part # SP-222275. This spring measures...
  view full answer...


• Weight Distrobution System With Sway Control for a 2010 2WD Ram 1500 and 3500 lb 1 Axle Trailer
  
• For most weight distribution, I recommend going all out and just purchasing a full kit with the sway control and weight distribution all together. This saves time, money, and most importantly, frustration. You want to verify the tongue weight of your loaded trailer, which will include the weight of any cargo or gear added to the trailer, plus anything stored behind the REAR axle that you'll use during your trip. Think of this as the "Leaving today" weight. Because of the tongue weight...
  view full answer...


• Recommendation to Extend Factory 7-Way to Fit with New Bumper on 2010 Ram 2500
  
• There are a couple of options to extend the factory wiring at the rear of your 2010 Ram 2500 so that it can reach the new connecter opening on the 2015 bumper. The easiest solution is to use a 5th Wheel Wiring Harness like the Curt # C56070. This will plug in-line with your existing factory wiring and provide an extended harness on the other end. The only drawback on this option is that the Curt # C56070 represents the shortest 5th Wheel Harness that we offer at 7 feet long. So you will...
  view full answer...


• Is the Reese Elite Series 5th Wheel Hitch Compatible with a Revolution Pin Box and 2010 Ram 2500
  
• Yes, the Reese Revolution pin box and the Reese Elite Series 5th wheel hitches such as # RP30142 are compatible with each other. You will just need the appropriate custom wedge # SWW-01. Since you are using a Revolution pin box I recommend using the fixed version of the Elite hitch # RP30142 because the pin box is not meant to be used with a slider hitch. For an installation kit that will fit your 2010 Ram 2500 and the Elite hitch I recommend # RP30852 which is the custom fit below...
  view full answer...