Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
2400 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
2400 Pound Tongue Weight
17000 Pound Towing
Trailer Wiring:
2009 Toyota Tundra Trailer Wiring
With tow package use HM11143395 for wiring
Features:
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Tech Tip:
Hitch will fit Rock Warrior and TRD or Sport package models. Vehicle is factory equipped with a 4-pole wiring harness tucked behind the bumper towards the middle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Weight Distribution Towing Capacity:
800 Pound Tongue Weight
8000 Pound Towing
Trailer Wiring:
2009 Toyota Tundra Trailer Wiring
With tow package use HM11143395 for wiring
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Tech Tip:
Vehicle is factory equipped with a 4-pole wiring harness tucked behind the bumper towards the middle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Weight Distribution Towing Capacity:
800 Pound Tongue Weight
8000 Pound Towing
Trailer Wiring:
2009 Toyota Tundra Trailer Wiring
With tow package use HM11143395 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Tech Tip:
Hitch does not fit vehicles with TRD or Sport package. Vehicle is factory equipped with a 4-pole wiring harness tucked behind the bumper towards the middle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1200 Pound Tongue Weight
12000 Pound Towing
Weight Distribution Towing Capacity:
1400 Pound Tongue Weight
14000 Pound Towing
Trailer Wiring:
2009 Toyota Tundra Trailer Wiring
With tow package use HM11143395 for wiring
Features:
Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.
Installation Notes:
No drilling required for installation
Tech Tip:
Vehicle is factory equipped with a 4-pole wiring harness tucked behind the bumper towards the middle.
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This…
view full answer...I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
Excellent Experience. Nice website. Easy to find the right hitch. Hitch came quickly. It was a perfect fit for our Toyota Matrix with Ground Effects.
Mike
Decatur, IL