This Husky Liner Sunshade is a light-duty alternative to a contractor's rack. Provides some sun blockage, additional security, and limited protection for a sliding back glass.
The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights is only available is white part #BWPUCP7520WA or black part #BWPUCP7520BA. B&W does not produce this ladder rack with a chrome or stainless finish.
Hey Rob, the Adarac Pro Series Custom Truck Bed Ladder #A38ZR does fit your 2022 Jeep Gladiator with the factory bedliner and will work great. There isn't any cutting or drilling required.
Yes, we have seen people fit crossover style tool boxes like you have on top of the B and W Headache Rack part #BWPUCP7520BA that you referenced. You'd need to position the box so that the lid can still open though.
Hey Eric, Using only 4 of the 5 mounting holes on #DE28YR is not recommended when installing new brakes. There is a chance of failure that could cause a lot more problems, it is best to install them exactly how they should be. With that said by far…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Yes, it is! You're going to need to cut out more than just the holes though when installing the DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ. The mat is 3/8" thick so you'll have to cut out more of an H pattern or your 5th wheel hitch…
Hey Scott! The #TL86NR is designed to fit the 6-3/4' bed. Do you have running boards? What kind of hitch do you have? If you have no running boards or cab length running boards with a factory or TorkLift hitch you need the #TL94PR. If you have no…
Hey Tom welcome! Both the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH94RE for a 6-3/4' bed or item #TH43002XT-780 for the 8' and the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever #item #TH44RE for 6-3/4' or item…
Hey Erik, the leg kit you are looking for is the part #CU53FR. This will convert your Curt A20 to a version of the hitch that will fit the OEM rail kit of your 2025 Chevy Silverado 2500 directly.
Hi Adrian; the Invis-A-Rack #DZ951550 (6-1/2' bed) and #DZ951800 (8' bed) are not compatible with any available tonneau covers. There was a time where TruXedo made one for this rack but it has been discontinued for a while now. If you want to…
Hey Elvin, I wasn't able to find any bracket kit for that light, but I was able to find the Ultra-Thin LED Strobe Light #3378892202 for amber and white lights, #3378892200 for just amber, or #3378892201 for just white lights, which can be mounted…
Filters
