2002 Ford Excursion Grille

Hello Cory. The difference between the two is that the Air Lift LoadLifter 5000 #AL88399 has an internal jounce bumper (bump stop), and the Air Lift LoadLifter 5000 #AL57399 does not. Both products have a 5,000 pound load leveling capacity, and are…

Hey John, the Air Lift kit part #AL57230 that fits your 2007 Dodge Ram 1500 is compatible with in-bed hitches but not mega cab models. The part #AL57295 is a fit for the mega cab models and fits with in-bed hitches. The part #AL88295 fits mega cab…

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

Hello Jeremy, thanks for reaching out. The Air Lift Air Helper Spring Cradles #AL59DQ will only work with the Air Lift brand bellows-style air bags. They will not work with the Firestone air bags.

We had the chance to install the Stromberg Carlson 5th wheel tailgate part #VGD-10-4000 on a similar 2011 Ram 2500 and we found that it fit well and both sides of the tailgate hinge fit like it should. Check out the install video for this tailgate…

Yes! the Air Lift Load Lifter 5000 #AL88399 attaches to the bottom of your 2020 Ford F-250's frame it will easily fit with most any gooseneck hitch you have installed in your truck to attach your fifth wheel hitch to. This installs by removing…

Hey Donovan, you do need to have a minimum of 5 psi in the Air Lift air bag kit part #AL88399 that you have. If you run less pressure than that the bag will eventually deform and wear itself out. At 5 psi though you won't feel them at all so you…

We have just what you are looking for. For the rear of your 2018 Ford F-350 Super Duty 4WD I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle #AL88399 which provide up to 5000lbs of load…

Yes, you can simultaneously inflate your Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88399 if you use the Air Lift Union Tee for 1/4" Air Lines #AL21838. This will allow you to fill both bags using a single inflation valve.

The jounce bumper in the #AL88399 can cause a slight increase in ride height even when the bags are uninflated. There is a much better option for you since you do not want any additional height. Instead you'd want the Firestone kit part #F2600…

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.