Vehicle Style: 2.3L I4 Engine
Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
...of the exhaust system from the outlet of the catalytic converter back to the tailpipe. MagnaFlow systems boast mandrel-bent tubes that allow for unrestricted airflow by maintaining the same diameter through every...
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
...span>MagnaFlow systems boast mandrel-bent tubes that allow for unrestricted airflow by maintaining the same diameter through every curve. This consistency in diameter decreases back pressure. Each MagnaFlow...
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
...3-1/2" Tip length: 9-1/2" Limited lifetime warranty The cat-back system is the portion of the exhaust system from the outlet of the catalytic converter back to the tailpipe. MagnaFlow syste...
More Information >Videos
for Exhaust Systems
Help Articles
for Exhaust Systems
Expert Answers
for Exhaust Systems
Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.
view full answer...When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric…
view full answer...According to my research, your 92865A-1 hub/drum has a 25580 inner and an 14125A outer bearing and a 8 on 6-1/2 inch lug pattern, as does the AxleTek #AKHD-865-7-2-K hub drum you referenced. The #AKHD-865-7-2-K would be an acceptable replacement…
view full answer...I recommend to use the Solera 16-1/2' Slider part #LCV000435661 which matches the boxes width exactly so you will not have side overhang like we normally recommend but it…
view full answer...We have toppers that'll work for 2 of your 3 sliders. For your 12 foot 9-1/2 slide, use #LCV000168109 which is designed for slides measuring between 152-157 inches wide.…
view full answer...If you check out the picture I attached you can see that the roller and slide out awning assembly of the Solera RV Slide-Out Awning #LCV000435661 actually will sit below the awning rail so your setup having a tight clearance between the rail and…
view full answer...You have a good eye as the black tubing sections are plastic for the Camco Gen-Turi RV Generator Exhaust System #CAM44461. It's just the curved pipe section that is made out of…
view full answer...Hi Chris; your 2022 Ford Expedition will have a Normally Closed application, and it is possible when installing the Roadmaster Brake-Lite Relay Kit #RM-88400 that you'll need…
view full answer...According to Solara (Lippert), the correct number of turns to set the proper tension of their slide toppers like #LCV000163285 is between 12 to 16 turns, so I'd consider 14 to be…
view full answer...The best way you can determine if your 2021 Ford F-150 has LED or Incandescent lights is to call the dealer with your VIN number and they should be able to tell you. If your vehicle has LED lights, you can use the Roadmaster Universal Wiring Kit…
view full answer...Ultimately you do not need a converter as you can wire the tail lights on your 2022 Ford F-150 to operate as brake and turn signals just like the lights on your motorhome. You will need to use the Roadmaster Universal Wiring Kit with Smart Diodes…
view full answer...The 2022 Ford F-150 (Non-Hybrid) requires special diodes for the flat-tow wiring harness. If you're not using these special diodes then you could run into issues like you…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
Perfect! As usual, you guys pulled through perfectly! Thanks so much!
Grant
Athens, GA