Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Illuminate Your Space with Incandescent Work Lights
Incandescent work lights offer a warm, reliable glow perfect for indoor applications. While not ideal for outdoor use due to lack of gasketing, they are great for dimly lit areas where a subtle light is needed. Easily replace the bulb with an LED for more brightness if desired.
Incandescent work lights provide a warm, steady light that is perfect for indoor settings. They are particularly useful in areas where you need a light that won't distract you, like workshops or garages. Plus, they can be easily upgraded to LED bulbs for more brightness if needed.
While incandescent work lights are versatile, they are not ideal for outdoor use due to the lack of gasketing, which can allow water to seep in. They are best suited for indoor applications where moisture is not a concern.
Installation is straightforward and user-friendly. Many find these lights easy to mount and replace existing fixtures. They are a great option for those looking to quickly upgrade their lighting setup without hassle.
These lights provide a softer glow, which is perfect for tasks that don't require intense brightness. For those needing more light, swapping the incandescent bulb for an LED equivalent can significantly increase brightness.
When upgrading to LED bulbs, ensure they are compatible with your fixture. LEDs offer increased brightness and energy efficiency, making them a great choice for those looking to enhance their lighting setup while reducing energy consumption.
Filters
