wheel chocks - Red, 1 Chock

Hey Brian, thanks for the pictures. The etrailer Anti-Rattle Hitch Collar item #e38FV is not going to fit your Ascent's factory hitch. It's going to be a tight fit if you can even mount it with the chain hangers so close but the main issue is…

Hey Teo, we have a solution for you but we don't have any harnesses that work as both a tow bar lighting kit and a trailer wiring kit. So what you'd want is the Curt part #C96JR for the tow bar lighting and then for the trailer wiring…

Hey Rob, congrats on the new 5th wheel trailer! A Curt Helux Pinbox like item #C85MJ is going to have no affect on the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer item #UF19-950200 you were looking at. The shock absorption feature is to take out…

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

Hey Mitchell, yes the Valterra StayPut Tandem Trailer Tire Changing Ramp #VAL68MB that you referenced will work with the Curt independent suspension you have and will still lift the trailer wheels up high enough to allow you to change it. How do you…

Gerald, the 12-ton Tallboy #PM94FR weighs about 37 lbs all-in, including the base plate, extensions, and carry bag. It’s a little heavy, but that’s the tradeoff for stability and steel construction - the 9-1/2 inch base plate and solid risers are…

Yes, Gary - the #PM94FR is perfect for that. With a 24,000-lb capacity, it’s well beyond what you’ll need for lifting one axle of a fifth wheel. It reaches from 11-5/16" to 27-1/16", so just make sure it’ll fit under your frame or…

Yes, Rick - the 12-ton #PM94FR is built for exactly that kind of heavy-duty work. With a 24,000-lb capacity and a lift range of 11-5/16inch to 27-1/16, it’s ideal for service trucks, farm trailers, and loaded goosenecks. The large 9-7/16inch square…

Yes, we do Tyler. For an air compressor that can be powered off of a 7-way connector, I recommend the Air Lift 7-Way Automatic Portable Air Compressor item #AL79FF. This air compressor can go as high as 120 psi to fill your air stream's tires.…

Hi Mike! The Curt #C11372 hitch you found will actually fit both the 2011 Lexus IS 250 and the IS 350, which makes it easier. However, it should be noted that this is a Class 1 hitch and has 200 pounds of tongue weight. Do you already have the…

Hey Greg, they're not going to work together. The clamps that attach the Air Lift Air Springs like item #AL88341 hang over your frame right where the brackets for the B&W Turnoverball Gooseneck Hitch item #BWGNRK1020 sit. You'll want to…

Yes, the bayonet fitting of the part #CAM39863 that you referenced will fit the bayonet style fitting of the #CAM39761.