trailer ramps - Erickson

Hey there Daniel - it really depends on your trailer height and what you’re loading. The 6' RapidRamps kits (part numbers #e47XV for 5–6-1/2' wide trailers and #e67XV for trailers over 6-1/2' wide) give you a gentler approach angle, which…

Hey Kevin! The lip on either side of the etrailer RapidRamps #e47XV is approximately 1.875" tall. These 6' long ramps are designed for trailers over 6-1/2' wide and can hold up to 6,000 lbs per pair (3,000 lbs per ramp). What will you be…

Yep, that flexibility is built right in, Chris. The ramps slide side-to-side along the index bars on all RapidRamps kits, whether you’re looking at the 5' options (#e37XV for 5 - 6-1/2' wide trailers or #e97XV for over 6-1/2' wide) or the…

Yes, they can, Chris. With both 6 foot RapidRamp kits #e47XV and #e67XV, the ramps slide side-to-side along the index bars so you can line them up with different tire widths. Once lifted back in the upright position, they latch in place, and you can…

Hey, Mike. That's a really good question. I'd like to get some pictures of your trailer so I can get a visual of what yours looks like in the back. If you could reply to the email with pictures I'll be able to go from there! I want to…

Hello Tyler, Thanks for being such a loyal etrailer neighbor, it only took 9 years to finally write in with a question. The universal rails can be a huge pain to install, so I definitely see why you’d want to go with a custom kit. The correct custom…

Hey Jim, that’s a great question and I completely understand wanting this to be a clean, no-hassle bolt-on. The good news is the Trailer Valet system part #TV68FR uses a universal mounting bracket design, so you don’t need to worry about matching up…

Hey Walter, I checked with Curt and the RVI Series 4 part #RVI44FR that you referenced showing a Code 4 is related to exposure to cold weather and it's causing some circuit board issues. The solution is to let it sit indoors to warm up for 15 to…

Hey Brian, the ramps automatically latch when you fold them straight up into the vertical position. On a 5 foot wide trailer using #e37XV or #e47XV, that latch holds the ramps upright without straps, pins, or extra steps. They stay locked in place…

Hey Dylan - both M-3 plates measure 81-3/4 inches wide, so you'd need to trim off a little bit. The aluminum one #M348FR would be easier to trim, so I'd pick that over the steel one. The hinge runs the full width so you’ll still get solid…

Hi Alex! The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 16K #325-GH-513 is just the regular ball mount, but you can grab the Pintle Lock for Gen-Y Adjustable Ball Mounts w/ 2" Receivers #325-GH-032…

Howdy Jason, for trailers over 6-1/2 feet wide, you’ll want either #e97XV 5 foot ramps or #e67XV 6 foot ramps. Both bolt directly to a wood trailer deck and include everything needed for installation. Between the two, ramp length is the deciding…