Aluminum loading ramp plates can quickly convert two 2" x 12" x 8' boards into an inexpensive loading ramp set to roll your ATV, snowblower, lawn mower, etc., into your pickup truck bed or onto a trailer.
Features:
Specs:
Note: Angle of ramp must not exceed 30 degrees. Never drive/ride on your vehicle for loading or unloading.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the Erickson aluminum ramp ends for two inch by 12 inch boards for a quantity of two. Now, these are aluminum loading ramp plates, which can quickly convert two eight foot long two by 12 boards into an inexpensive loading ramp set to roll your ATV or snowblower or even your lawnmower into your truck bed or on a trailer. Basically, bolting these end plates onto two by twelves is a great way to get your wheel equipment to the shop or another location. And it is best used with eight foot long planks, so you don't exceed a 30 degree load angle.
Now, of course, the wood is not included. You would have to supply that. What is included is everything here on the table, the two 1/4 inch thick plates and the hardware to install it, the two non-skid pads right here, and then the two safety strap D-rings and hardware. Load capacity is 750 pounds per pair. Basically, your wood will attach right here.
The holes are there. Use the hardware that's included. And then on the underside of the lip, you'll take the included skid pads as an adhesive backing that you can install right on there. So when you do install that onto the edge of your trailer or your truck bed, it keeps it from moving. And then they also include the D-rings with the hardware.
The D-rings you would apply to your wood to where you could attach your safety straps to. A few dimensions on this. Width of it's 11 and 1/4 inches. Length, one end to the other, eight and 1/4 inches wide, or long. But that should do it for the review on the Erickson aluminum ramp ends for two inch by 12 inch boards.
.
Sweet
thumbs up
Product looks good; haven't used it yet. Excellent delivery time.
The product arrived quickly and was exactly as described.
El producto recibido en excelente estado.
Delivered on time and as expected.
easy to install fast on shipping
Received the order quickly and also fast response to my questions,
Great product , great price.
Great product that will get a lot of us e.
The order solved what i needed for a ra mp.
Great deal
Great product. good quality.happy with it.
Ease of website was second to none. Product shipped quickly and is everything I had hoped for.
Thx ETRAILER
Received product with in 3 days and it is everything as per the description. Made the ramps today and they work great. I would recommend this company to my friends.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.