trailer hitch lock - Keyed Unique, Master Lock

Hey Jonathan, We do have a kit from Infinite Rule for locking pins specifically for that B&W Tow And Stow With Pintle #IR52FR. This comes with the specific locks needed for that pintle hook you have and will have all points lockable. What are you…

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

Welcome back Leroy! The Dual Pin Lock for B&W Tow & Stow Pintle Mount item #BW72AR is the correct lock for the B&W Tow & Stow Pintle Hook item #BW77BR. The Dual Pin Lock item #BW72AR is going to attach in the center of the adjustment…

Welcome back Steve! The InfiniteRule Hitch Locks for B&W Tow & Stow Pintle - 2.5" Receiver item #IR52FR are the correct locks for the B&W Tow & Stow Pintle Hook item #BW77BR. The InfiniteRule item #IR52FR includes five locking…

Hello Tom, Welcome to etrailer, I'm glad you found us! I see you were looking at the ICON locks, EXCELLENT choice! I was pretty impressed when they came here to etrailer with power tools and other locks just to show us how well their locks are…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hello Bob, thanks for reaching out. We do have a lock that will work with the etrailer Adjustable 2-Ball Mount #e66PR. For that I recommend the following: - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span -…

Hi Julian, great question, and I’m glad you’re looking into locking it down because that’s a solid hitch and definitely worth protecting. I recommend the InfiniteRule lock set part #IR29FR for the B&W Tow and Stow TS20053B part #BW77BR rated for…

Hey John! You can use the Mounting Bracket for Trailer Fender #CE26098G to install the CE Smith Single Axle Trailer Fenders #CE19504-2. As for the actual hardware, 3/8" stainless bolts, stainless flat washers, and stainless nylon lock nuts would…

Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…

Hello Todd, great question. The Yakima EXO Swing Away and Gear Locker #Y62VR is going to allow you to open the rear doors on your 2025 Sprinter 3500XD RV at around 90 degrees. Then with the box removed you may face a clearance issue with your…