Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Hey Richard, the bag that comes with the Andersen Camper Leveler part #AN68VR measures 15 inch x 8.75 inch x 6 inch. Are you wanting to repurpose the bag?
Hi Scott! There is a way to fine tune your Roadmaster Exact Center Steering Stabilizer #RM33RR. I included a link that you will want to scroll down to step 9 to see what you can do, but basically there are jam nuts you can adjust that can do much…
Hey Mark, thanks for providing all the details! I see you ordered the 18.5K Weigh Safe True Tow Weight Distribution Hitch (WDH) #WS49MR. This might be a little heavy for your application, but if you have your trailer weighed down to the GVWR and a…
Hello Alberta, thanks for reaching out. I have heard of this happening before with the Voyager monitors where condensation gets inside and fills the camera with water. Sadly there is not a great way to clean this and the camera is most likely done. I…
Hey Brian, thanks for the pictures. The etrailer Anti-Rattle Hitch Collar item #e38FV is not going to fit your Ascent's factory hitch. It's going to be a tight fit if you can even mount it with the chain hangers so close but the main issue is…
Hi Chris! Quartzsite sure sounds like a great stop - hope you’re soaking up that sun! Yes, the SnapPad StakPad blocks black #SN74VR or white #SN64VR are a universal fit and will work with your hydraulic auto-leveling system. They’re especially handy…
Hello Steven, thanks for reaching out. You are correct that using a swing away adapter or hitch extender will reduce your hitches carrying capacity by half. We put that warning on the part page for all of the hitch adapters we offer. So if the hitch…
I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack #LC298707 and found that the 6" square SnapPads were a fit. If your 2022 Forest River Vibe travel trailer only has one #LC298707…
Hey Terry, so the O-rings of the Lippert Replacement Foot part #LC324269 basically go on either side of the foot pad to allow it to pivot a little bit. It goes bolt, metal washer, o-ring, foot pad, and then o-ring.
Durable 9-Inch Jack Foot Pads for Secure RV Stability
Explore the robust 9-inch jack foot pads designed for RV enthusiasts who need reliable support. Perfect for those with 4 jack pads, these are easy to install and provide excellent stability on various terrains. Ensure your RV stays level and secure, even
Yes, these 4 jack pads are designed for straightforward installation. They fit snugly onto jack feet with straight edges, providing a secure hold. Just ensure your jack feet match the design for optimal performance.
These jack pads are built to handle the weight of most RVs, including larger Class A motorhomes. However, ensure your jack feet have straight edges for the best fit and performance. For extremely heavy RVs, additional support may be beneficial.
The 9-inch jack foot pads offer a larger surface area, which helps distribute the weight of your RV more evenly. This is crucial for preventing sinking in soft ground and maintaining stability on uneven surfaces, ensuring a safe and secure setup.
Using 4 jack pads provides balanced support across all corners of your RV, reducing stress on individual jacks. This setup helps maintain a level RV, preventing unwanted movement and enhancing overall stability during your stay.
When using these jack pads, consider the ground conditions. On soft or muddy terrain, additional support like wooden blocks can prevent sinking. These pads are durable but work best on firm, level surfaces for maximum stability.
Filters
