Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Hey Richard, the bag that comes with the Andersen Camper Leveler part #AN68VR measures 15 inch x 8.75 inch x 6 inch. Are you wanting to repurpose the bag?
Hi Scott! There is a way to fine tune your Roadmaster Exact Center Steering Stabilizer #RM33RR. I included a link that you will want to scroll down to step 9 to see what you can do, but basically there are jam nuts you can adjust that can do much…
Hey Mark, thanks for providing all the details! I see you ordered the 18.5K Weigh Safe True Tow Weight Distribution Hitch (WDH) #WS49MR. This might be a little heavy for your application, but if you have your trailer weighed down to the GVWR and a…
Hello Alberta, thanks for reaching out. I have heard of this happening before with the Voyager monitors where condensation gets inside and fills the camera with water. Sadly there is not a great way to clean this and the camera is most likely done. I…
Hey Brian, thanks for the pictures. The etrailer Anti-Rattle Hitch Collar item #e38FV is not going to fit your Ascent's factory hitch. It's going to be a tight fit if you can even mount it with the chain hangers so close but the main issue is…
Hi Chris! Quartzsite sure sounds like a great stop - hope you’re soaking up that sun! Yes, the SnapPad StakPad blocks black #SN74VR or white #SN64VR are a universal fit and will work with your hydraulic auto-leveling system. They’re especially handy…
Hello Steven, thanks for reaching out. You are correct that using a swing away adapter or hitch extender will reduce your hitches carrying capacity by half. We put that warning on the part page for all of the hitch adapters we offer. So if the hitch…
Hey guys! Man this would have to be one of the best bargains around. Quick shipping, great customer service and good quality equipment. I am going to recommend all my buddies to you.
Allen
Brandon, MS
Optimize Your RV Stability with 5-1/2 Inch Jack Foot Pads
Enhance your RV's stability with 5-1/2 inch jack foot pads. Perfect for those who need a single replacement or are looking to expand their setup. These pads provide a larger footprint, reducing movement and ensuring a stable base on various terrains. Idea
Yes, these pads are designed to provide a stable base on various ground types, from soft soil to hard surfaces. They enhance the footprint of your jacks, ensuring stability across different terrains.
These pads increase the contact area with the ground, reducing movement when setting up or tearing down. They help stabilize the RV, making it feel more secure when walking inside, and are effective on various terrains.
For easy installation, apply a bit of dish soap to the pad's edge. This helps it slide into place smoothly. Even in less-than-ideal weather, the pad fits snugly and securely, ensuring a perfect fit.
These pads are trusted by RV enthusiasts for their durability and effectiveness. They have been used successfully for years, providing a larger footprint and reducing movement, making them a reliable choice for any RV setup.
Opting for a single pad is great for replacing a worn-out pad or testing the product's effectiveness before committing to a full set. It's a cost-effective way to maintain or enhance your RV's stability.
Filters
