Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Hey Richard, the bag that comes with the Andersen Camper Leveler part #AN68VR measures 15 inch x 8.75 inch x 6 inch. Are you wanting to repurpose the bag?
Hi Scott! There is a way to fine tune your Roadmaster Exact Center Steering Stabilizer #RM33RR. I included a link that you will want to scroll down to step 9 to see what you can do, but basically there are jam nuts you can adjust that can do much…
Hey Mark, thanks for providing all the details! I see you ordered the 18.5K Weigh Safe True Tow Weight Distribution Hitch (WDH) #WS49MR. This might be a little heavy for your application, but if you have your trailer weighed down to the GVWR and a…
Hello Alberta, thanks for reaching out. I have heard of this happening before with the Voyager monitors where condensation gets inside and fills the camera with water. Sadly there is not a great way to clean this and the camera is most likely done. I…
Hey Brian, thanks for the pictures. The etrailer Anti-Rattle Hitch Collar item #e38FV is not going to fit your Ascent's factory hitch. It's going to be a tight fit if you can even mount it with the chain hangers so close but the main issue is…
...Hi Chris! Quartzsite sure sounds like a great stop - hope you’re soaking up that sun! Yes, the SnapPad StakPad blocks black # SN74VR or white # SN64VR are a universal fit and will work with your...
Hello Steven, thanks for reaching out. You are correct that using a swing away adapter or hitch extender will reduce your hitches carrying capacity by half. We put that warning on the part page for all of the hitch adapters we offer. So if the hitch…
Hey Terry, so the O-rings of the Lippert Replacement Foot part #LC324269 basically go on either side of the foot pad to allow it to pivot a little bit. It goes bolt, metal washer, o-ring, foot pad, and then o-ring.
For RV enthusiasts seeking stability, the 11-1/2 inch jack foot pads offer robust support and durability. While installation might be a bit tricky, the quality and performance make them a worthwhile addition to your RV setup.
Yes, they are versatile and can be used with most RVs. Their size and design make them a great choice for anyone looking to enhance stability and prevent damage to their RV's jacks.
These pads provide a larger surface area, distributing weight evenly and preventing sinking on soft ground. This ensures your RV remains stable, even on uneven terrain, making your camping experience more comfortable and secure.
These pads are typically made from high-quality, durable materials like heavy-duty plastic or metal, ensuring they withstand the weight of the RV and resist wear and tear over time.
Installation can be a bit challenging, requiring some patience and precision. It's important to follow the instructions carefully to ensure a secure fit. Once installed, they offer excellent support and durability, enhancing your RV's stability.
These pads are designed for those who need reliable support on various terrains. Their robust construction and ability to prevent sinking make them ideal for frequent travelers who encounter different camping conditions.
Filters
