Thanks for asking Glen, I found the specs you were asking about. Bigfoot Hydraulic Tongue Jack #BF34FR has 16.5 inches of lift, and when it’s fully extended it measures at 24 and a half inches overall. Retracted, it sits at 8 inches, so you get a…
Hey Bill. We've got just over a dozen options for 15" steel wheels that'll work with the Kodiak Disc Brake Kit item #K2R35S, you were looking at. I have linked our selection below. The 15" x 6" Rim Dexstar Steel Mini Mod…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hey Josh, so we can help but we don't have any custom fit gooseneck hitches that fit your 1976 Ford F-250. Best option would be a universal style option like the Curt plate part #C65500 which would need to get welded to the top of the truck frame…
Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…
The Thule Wingbar Evo crossbars like #TH711320 have channels on top of them that standard roof rack accessories that are designed for channel mounts. The track nut part #853-5715 that you referenced would fit in this top channel as well.
Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.
I would be happy to help! Since your 2021 Subaru Outback Touring XT has the factory 4-way connector I recommend using the 7-way Connector Kit #ETBC7L which is designed specifically for wireless trailer brake controllers. This 7-way plugs into your…
Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…
No, they're not the same. The BP01-301 fits 12-1/4" x 4" Dexter brake assemblies and the BP01-330 DEXTER fits newer Dexter brake assemblies made after 2017 that are 12-1/4" x 5". We are out of the BP01-301 as well and have…
The correct bearing kit for a Dexter 4,400 lbs axle is item #BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a Lippert 3,500 lbs axles. This kit includes inner bearing item #L68149, inner race item #L68111, outer bearing item…
Typically the tongue weight listed on a trailer is the dry, or empty tongue weight. Tongue weight varies not only by how much stuff you have loaded in the trailer, but where it is positioned. You can add 200 pounds of cargo to a trailer and get the…
Padlocks for universal application with combination locks
Choose a universal application padlock when you need one lock for gates, storage lockers, and more, and get the convenience of a combination lock so you can leave the keys at home. Options include resettable codes using a flat-head screwdriver or a reset key, with dials that are clear and easy to use.
Yes, if they are resettable. Open each with the factory 0-0-0-0 code, insert the included reset key into the side, rotate 90 degrees, set your chosen code, then remove the key. Scramble and test each lock to confirm they all match.
Methods vary. Some require a flat-head screwdriver to reset the combination. Others open with the factory code 0-0-0-0, then use an included reset key inserted into the side and rotated 90 degrees to set a new code. After setting, remove the key, scramble the code, and test to confirm it's set properly.
Operation is typically clear and easy, and changing the locking dial is straightforward. If a slide bolt catches and does not operate smoothly, it can still work. Check the slide bolt action when you set the code and ensure it fully engages and releases before relying on it.
Yes, it can provide long-time service in a salt air environment. Look for options noted to hold up on the Oregon coast, living in the salt air environment. Inspect periodically and keep the mechanism clean to help maintain performance.
2-1/16 Inch Diameter
3/8 Inch Diameter
5/16 Inch Diameter
Filters
