Wheel and Tire Cleaner - Color Changing Liquid

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

Hey Josh, so we can help but we don't have any custom fit gooseneck hitches that fit your 1976 Ford F-250. Best option would be a universal style option like the Curt plate part #C65500 which would need to get welded to the top of the truck frame…

That’s a great question, Alvin. Even though your fifth wheel won’t come close to 12 tons total, the Tallboy #PM94FR gives you a generous safety margin and smoother control when you’re lowering heavy loads. The oversized 9-7/16 inch base plate spreads…

Trailer tires are organized by Load Ranges which basically represents the weight capacity for that tire size. So for example the Load Range C trailer tire and wheel part #AM32395 that you referenced has a weight capacity of 1,820 lbs at 50 psi.…

Hey Connor, A typical sliding 5th wheel hitch is going to give you 12-14" of travel for extra turning clearance while a rotating pin box like the Reese Sidewinder will move the pivot point of the trailer back 22". Rotating pin boxes give…

Hey Paul! Yes, the Norcold RV Mini Fridge w/ Built-In Freezer #NC37VR will meet your needs. This fridge is a great choice for off-grid camping. It has a latch to keep the door secure on that unlevel terrain, and will draw approximately 30-50Ah a day…

The Curt A16 Fifth Wheel Hitch #C16120 will work well with your Reese Revolution pin box. The wedge you'd then want for the Revolution that's designed for this hitch is the part #C16992. With this setup you would have great turning…

The Mopar 30k hitch you have is the A-Series and the 20k is the Q-Series. Since the A Series is compatible with the Sidewinders you'd just need the wedge part #C16992. Or if you have the second gen Sidewinder like part 69220 or 69220 you'd…

I have a suspicion on what the issue could be. There is a good chance that the 5th wheel hitch and wedge are not compatible with the Sidewinder. It at all comes down to what Sidewinder you have. If your Sidewinder is the more current model (68220),…

5th wheel wedge #C16992 is the correct one for your Curt A16 hitch to allow use of a Revolution pivoting pin box. Since one of the two bolts sheared off it sounds like the initial installation left one of the bolts too loose (the one that did not…