Watersport Carriers - No Load Assist

Hey Stefano, yes the LowBed kit part #MAL33TR is all that you need to convert your Malone Microsport #MPG460XT to a LowBed style trailer. The Yakima DeepSpace part #Y65RR is also compatible with the 2nd Tier Kit part #MPG474 too. How come you are…

Hi Mary, There can be differences in the way components under the vehicle are ran that can change how a trailer hitch will need to be shaped to fit depending on the model type. I spoke with EcoHitch and they stated that they haven't tested the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Paul, The EcoHitch Hidden Trailer Hitch Receiver #EH87CR would not require you to remove the rear bumper or tail lights and would be a bolt-on installation. It does require you to notch out a hole in the rear fascia for the receiver tube to stick…

The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…

Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put on an aftermarket rack to…

Hello Ziggy, Good question. The DeeMaxx Alpha G1600 Plug and Play Electric Over Hydraulic Actuator #DE75KR works with 2017–2022 GM trucks that have built-in brake controllers, like the Silverado and Sierra. It’s built to “trick” the truck into…

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…

Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898. BaseLine Towers…

Hey Loyd, nearly all roof rack setups for top channels will fit the Yakima channels you have on your cap. Rhino Rack has complete kits for this that include their HD crossbars with the part #Y01-140B-NT which comes with 65 inch long crossbars.

Hello Karen, thanks for reaching out. The Malone SeaWing Kayak #MPG113MD you are using is a decent carrier for more standard kayaks, but I can see how the width of the carrier may not be ideal for the wider "sit on top" style kayaks. I…

The best option we offer to carry both kayaks and paddle boards but not at the same time is the Thule Compass Kayak and SUP Carrier part #TH890000 because the upright can be folded down to carry up to two paddle boards or one kayak and the upright…

Hey Stefano, yes the LowBed kit part #MAL33TR is all that you need to convert your Malone Microsport #MPG460XT to a LowBed style trailer. The Yakima DeepSpace part #Y65RR is also compatible with the 2nd Tier Kit part #MPG474 too. How come you are…

Hi Mary, There can be differences in the way components under the vehicle are ran that can change how a trailer hitch will need to be shaped to fit depending on the model type. I spoke with EcoHitch and they stated that they haven't tested the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Paul, The EcoHitch Hidden Trailer Hitch Receiver #EH87CR would not require you to remove the rear bumper or tail lights and would be a bolt-on installation. It does require you to notch out a hole in the rear fascia for the receiver tube to stick…

The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…

Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put on an aftermarket rack to…

Hello Ziggy, Good question. The DeeMaxx Alpha G1600 Plug and Play Electric Over Hydraulic Actuator #DE75KR works with 2017–2022 GM trucks that have built-in brake controllers, like the Silverado and Sierra. It’s built to “trick” the truck into…

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…

Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898. BaseLine Towers…

Hey Loyd, nearly all roof rack setups for top channels will fit the Yakima channels you have on your cap. Rhino Rack has complete kits for this that include their HD crossbars with the part #Y01-140B-NT which comes with 65 inch long crossbars.

Hello Karen, thanks for reaching out. The Malone SeaWing Kayak #MPG113MD you are using is a decent carrier for more standard kayaks, but I can see how the width of the carrier may not be ideal for the wider "sit on top" style kayaks. I…

The best option we offer to carry both kayaks and paddle boards but not at the same time is the Thule Compass Kayak and SUP Carrier part #TH890000 because the upright can be folded down to carry up to two paddle boards or one kayak and the upright…