The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have…

One solution that seems to work well with the factory hitches of the 2017 Chevy Silverado 2500 would be shackles like the #358smallshackle which you'd attach to the loop on your hitch and then attach the safety chains…

From the center of the hitch pin hole to the center of the shackle bolt hole on the Curt Tow Strap Loop for 2" Hitches #C45832 is going to be about 4-1/2" (see attached photo).

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled…

The Kodiak Disc Brake Kit part #K2R1058D11 Dexter 10 rated axles. They will need to be 8-288, 2 piece hub built from Feb. 1990 to Aug. 2009. Yours fits the age range so theres a strong chance this is the right kit.

Yes, we have everything you need to convert the electric drum brakes on your 2014 Kaufman Car Wedge Trailer to electric over hydraulic disc brakes. In order to do this you are going to need disc brake assemblies, trailer hubs, brake lines, and an…

I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.

I went out to the warehouse to take some measurements of Curt trailer hitch #C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of…

The hitch tube of the Curt Hitch part #13028 is going to be right at 4-1/2 inches below the frame it connects to and the opening would then be right at 7 inches forward of the rear most mounting hole. You'd have to…

As we have not had a 1973 Ford F-100 in our shop to test fit the available receivers I can only give you the measurements from one of our receivers so that you can see where it will sit on your truck. The Curt Trailer Hitch Receiver #C14082 is…

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung…

I went to our warehouse to measure the Draw-Tite Ball Mount #2753 for the dimension you asked for. Please refer to the linked photo I prepared for you.