Hey Craig! We do have the Norcold Polar N7X 3-Way RV Refrigerator #NC48VR. It operates on 120V AC, 12V DC, and LP gas, and the recommended enclosure opening is 23.50" to 23.63" wide x 52.88" to 53.01" high x 24.00" deep.…
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
Happy to help Nick, thanks for reaching out! The Kenda Karrier ST205/75R15 KR53 Radial Trailer Tire #KE85TJ has a speed rating of 87 mph, speed symbol N is stamped on the side wall of the tire. This is a Load Range D tire with a maximum load capacity…
Hi Tyler! We do indeed have the 2-1/2" Buyers Hitch 1809070! We just have it as a different part number that I have listed below: Buyers Hitch Plate w/ 2-1/2" Receiver and ICC Bumper for Ford Cab and Chassis - 20K #BP63SR This is a bolt on…
Since wheels will be able to withstand the psi rating of any of the tires that are meant to fit it you will need to look at the valve stem as that is the deciding factor. If your valve stem has the rubber all the way up to the threads, like part…
Hey Dan, yes the sensors of the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM89FR that you referenced will work with the longer valve stems you have on your 2017 Jayco Greyhawk 29ME. The sensors do not have a valve stem length…
Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…
Hi James! The largest aspect ratio (tallest) tire you can put on the Dexstar Steel Mini Mod Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 - Black #AM20242 will have an aspect ratio of 80. So the largest tire we have for this wheel is the Kenda…
Hey Nick, with the Sendel Aluminum Mod Trailer Wheel #AM22646 you'd actually be limited by the valve stem for air pressure and not the wheel itself. So if you wanted to go with a higher rated valve stem like the part #AM20906 you'd be able to…
Hey Keith, I would recommend the Kenda Karrier KR35 part #KE34TJ as it will cover everything you are looking for including having a nicer looking aluminum wheel. This is a high quality tire with a Load Range of D and a higher speed rating of N that…
Hey JD! The Aluminum AM03 Series Black Machined Trailer Wheel #AM43NR doesn't come with a valve stem so there is no set psi. The valve stem is always the limiting factor. If you add the Americana Metal, Bolt-In Valve Stem #AM20906 you will be…
Hi Kyler! We definitely have center caps and lug nuts that you can use, but the Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2 #KE34TJ does not include them. With that said, I recommend the…
Built for hands-on tire work, Counteract tire repair tools include preset-torque valve core drivers, filtered cores that help keep debris from bead material out, and wire brushes that clean mounting holes. When using balancing beads, check stem length—some cores are designed for longer commercial truck stems and may not fit short OEM MOPAR stems. Double-seal flow-through caps are not compatible with external TMPS sensors.
Yes, a suitable Counteract valve stem core can be used for that application. Confirm the specific core you choose matches your tire pressure range. If unsure, match the core to your tire's stated psi and valve stem style.
No, flow-through caps are not compatible with external TPMS sensors. They aren't designed to hold an additional cap because they act as a double seal cap and an inflation cap in one. If clearance is tight, use valve extenders made for external TPMS setups.
No. Counteract valve cores are designed to work with Counteract tire balancing beads. Equal Flexx is a granular polymer compound, which is different. Use Counteract cores with Counteract beads to avoid compatibility issues.
It simplifies installs with a preset torque that helps prevent overtightening valve cores and stems. This reduces the chance of crushed cores and leaks. If threads feel rough, clean the valve stem mounting holes with a Counteract wire cleaning brush before installing.
They are likely not a fit for short OEM stems. These filtered cores are designed for longer commercial truck style valve stems. Measure your stem length first. A shorter Counteract core may work, but confirm the stem length to be sure.