Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…
Hey Gino, I totally get what you’re trying to do there. Having that 12 volt outlet way across the cab can make things feel messy fast, especially when you’re trying to keep a clean setup and good visibility. The Voyager WiSight 2.0 monitor part…
Hey Alex. From the information I can find online it does look like your 2011 Keystone Cougar 318SAB does come prepped for a second AC unit. The bedroom roof vent should be reinforced and pre-wired for a 13.5k or 15k BTU unit. To check if your trailer…
Hey Mike! The Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR is designed to work with 45000, 47000, and 48000 air conditioners. Based on those numbers I'm assuming you those are 38000 series, but the model number doesn't always…
Hey Art, I was able to confirm with Hollywood Racks, the Sport Rider #HLY87RR can be used on a class B van! Generally, racks that can fold like the Sport Rider won't be rated for towable RVs or travel trailers. The reason is that they have…
Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…
Hey Clay welcome back! The correct grease seal for your Dexter 5,100 lbs axle is item #DX72UR. This is a pair of seals that are sized specifically for your 5,100 lbs axles spindles. These are manufactured by Dexter and matches their OEM parts. If…
Hey Dave, congrats on the new truck and trailer. You're definitely going to want the extra clearance an offset gooseneck ball provides with a 6-3/4' bed. The Gen-Y gooseneck pin boxes do not help with turning clearance. For your 2026 Chevy…
They Thomas, I'd be glad to help you pick out which tire pressure monitor system would be better for you. So generally what we have found is that the TST system part #TST-507-RV-4-C is a bit more rugged and will withstand a little more abuse…
Hey Michael, thanks for the information. Capacity wise the Curt Helux item #C34HB is exactly what you need for your 2022 Keystone Montana High Country 331RL. As far as fit goes, I'll need some additional information to confirm. The Curt Helux 5th…
Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…
Sized for compact RV sleeping spaces, the 74L x 50W Inch option makes an easy swap for bunks or toy hauler drop-down beds. It works just as intended. If your old mattress had an angled corner, note there isn't an angled-corner version.
No, angled-corner Teddy Bear mattresses are not available in 50 inch. Choose a rectangular mattress and confirm your platform accepts square corners. If your original had a cut corner, measure to be sure a full 50 inch width will clear walls or cabinets.
It works as intended with solid quality. Use it as a straightforward replacement for a bunk or drop-down bed where a 50 inch width is required. For the best result, verify the 50 inch width and your length to minimize fit issues.
Confirm your bunk or platform is 50 inch wide. Match the mattress length to your space and intended use, such as a bunk or drop-down bed. If replacing a factory mattress with an angled corner, plan for a rectangular fit since angled corners are not offered.
Yes, it can replace a drop-down bed mattress when the platform is 50 inch wide. Measure the bed base to verify the 50 inch width and match your existing length. If the original had an angled corner, note that angled-corner versions are not available.
Filters
