You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…
Hey Alex. From the information I can find online it does look like your 2011 Keystone Cougar 318SAB does come prepped for a second AC unit. The bedroom roof vent should be reinforced and pre-wired for a 13.5k or 15k BTU unit. To check if your trailer…
Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…
Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…
Hey Joseph, the m1102 trailer has a wheel bolt pattern of 8 on 6-1/2 inch which is what the Lionshead Mod Wheel part #LH44ZR has so this would work for the trailer. Do you have tires picked out already?
Hello again, David. I went and grabbed one of the Replacement Roadmaster Coiled Breakaway Cables #RM-8603 from our warehouse to see how long it extends. It absolutely does extend to 8'. I was actually able to stretch it closer to 9'. Any…
Based on the picture you provided the Atwood RV Propane Gas Detector - 12 Volt - White #AT36720 would be an exact replacement for your current Atwood RV Propane Gas Detector.
The closest replacement an Atwood PPOO224730 33535E propane detector is the RV Propane Gas Detector - 12 Volt - 2 Wire - Black item #RS44FR. It only uses one power wire instead of two so it is slightly different. It measures 4-1/4" long x…
We do have a couple of options to replace your Atwood 36636, and you can use either, with the only difference being the color: - RV Propane Gas and Carbon Monoxide Detector - Black #RS54FR or White #RS34FR Either will work perfectly as replacements…
RV Safe gas detectors are a reliable choice for ensuring safety in your RV. They are easy to install, blend seamlessly with your interior, and effectively detect propane and carbon monoxide. With features like flush mounting and compatibility with existing wiring, they offer peace of mind on the road.
Installing RV Safe gas detectors is straightforward. They connect to existing 12V wiring with wire nuts and require just a few screws. The design allows for a flush mount, making them blend in nicely with your RV's interior. The trim back plate helps cover any existing holes, ensuring a clean look.
Yes, RV Safe detectors are designed to effectively detect both propane and carbon monoxide. They have been tested with unlit propane burners and car exhaust, providing reliable alerts. However, placement is key, as fresh air flow can affect detection, so ensure proper installation for optimal performance.
RV Safe detectors are an excellent replacement for discontinued models like the Atwood unit. They offer surface mount setups that require minimal wall penetration, making them easy to position and install. The two different faceplates help cover a range of existing holes, ensuring a seamless fit.
The flush mount design of RV Safe detectors offers a sleek, unobtrusive look, eliminating the bulky appearance of older models. This design not only enhances the aesthetic of your RV's interior but also ensures the detector is less likely to be accidentally bumped or damaged.
RV Safe detectors are built to last, providing reliable performance over the years. Many have found them to operate as expected without the need for frequent replacements. Their robust design and effective detection capabilities make them a dependable choice for long-term safety in your RV.