Tough storage conditions are easier when your rig is well protected. With Good UV/Dust/Weather Protection, these covers handle sun, wind, snow, and dusty sites to keep your RV shielded. For a secure, usable setup, consider adjustable straps with weights to cut flapping and a zipper panel for door access, and be sure to measure the body length of your trailer—not the tongue—to choose the right size.
Installation is straightforward with clear instructions and videos. One person can do it in about 90 minutes, though two people make draping over the roof and ladders easier. Use included strap weights to pass under the RV. Work slowly around vents and accessories, and double-check strap routing before final tightening.
Pad sharp corners, vents, and the A/C shroud to help prevent rubbing or tears. Confirm the cover has door access if you'll need to get inside while stored. If you plan to remove and reinstall often, look for a more durable fabric. In humid areas, choose a breathable cover to help reduce mold; in drier, high-wind zones, a heavier multi-layer fabric can be beneficial.
Measure the body length of your camper and exclude the tongue for a travel trailer. Pick the size range that matches that body length so you can cinch it down and reduce catching wind. Look for adjustable straps to help get a snug fit. If you want to check inside while stored, choose a cover with a zipper panel for door access.
Yes, when sized correctly and cinched down, they can handle winter weather and high winds with minimal flapping. Multiple straps running under the trailer help in strong gusts. If a cover is too large to cinch properly, it can catch the wind. Tighten the straps and use all tie-down points to help keep it stable.
5th Wheel Cover
Class A RV Cover
Class C RV Cover
Filters
