Slide your gear out to you with 48 inch long RV cargo slides for quick, back saving access. Installation can be straightforward; inspect under the floor for tanks, wiring, or other obstructions before drilling. Some trays lock when closed but not when extended, so keep a hand on the load if you're on a slope while it's pulled out.
Inspect the deck and fasteners before loading. If screws are loose or a wood panel seems weak, resecure them and avoid over-torquing into particleboard. Add additional fasteners if needed so the deck stays tight and supported.
Some slides do not lock in the open position. On an incline or decline, brace the tray while loading or have a helper stabilize it. Check the product details for an extended-position lock if that feature is important to you.
Measure your bay's usable floor depth and door opening to confirm a 48 inch tray can move freely. If there's a lip, plan for spacers or a height adjustment kit to raise the mounting surface. Dry-fit, center the tray, and check underneath for tanks, wiring, or frame members before drilling.
Installation is generally straightforward with basic tools. Center the tray, mark holes, and verify you won't hit anything below the floor. If the tray doesn't separate from the tracks, slide it out a few inches and start rear mounting holes first to counterbalance while you finish the rest.
Confirm the tray's weight rating and note any capacity changes at partial or full extension. Secure heavy items so vibration doesn't shift the load when extended. Expect a little play in the locked position; adding rubber bumpers can help reduce clunking.
20 Inch Wide
26 Inch Wide
34-3/4 Inch Wide
42 Inch Wide
48 Inch Wide
Adjustable
Filters
