Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Hey Craig! Is this a Lippert Ground Control system? Is the part actually 304136? I asked Lippert and they said they don't have anything under 304135. If it is the 304136 the correct replacement is the Replacement Control Module for Lippert Ground…
Hey Jerry, does the LED still light up on the front of the Mighty Cord SurgeMinder Surge Protector and Circuit Tester #SU39SR? If it was actually overloaded it would have damaged the internals of it and it wouldn't work as a surge protector any…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Steve, yes the Dexter Nev-R-Adjust Brake Assembly set part #23-458-459 is the correct set for your Airstream based on the part numbers you mentioned. Also the hub/drum part #8-388-80UC3 that you referenced as well would be correct for your…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
Wow! I placed my order late on a Friday afternoon and when I get to work this AM my I have confirmation that my order has already shipped. Thanks for the great service.
Kirk
Abilene, TX
RV Interior Lights by Optronics in White
Ready for an upgrade, Optronics RV interior lights in white add bright, reliable light to enclosed trailers and campers. Installation is straightforward, with designs that work for ceilings, under-cabinet spots, and even above a shower stall in an RV.
Yes, they can put out plenty of usable light. Users noted they're great for loading and unloading in the dark and that a pair fully lit a large enclosed trailer. Plan the number based on your interior: glossy white walls and ceiling reflect more; plywood may need more fixtures. If you need detailed task lighting, add units at the ends and spaced through the middle.
Yes, they work well above a shower. They provide bright, clear light and the LED design reduces power draw and bulb changes. Mount securely and seal wiring as needed for moisture. If you want a softer glow elsewhere, mix with other fixtures to balance the space.
Pop the lens off at the cover slots using a blunt tool. Place a small wooden dowel or blunt handle in the notch and give a firm tap—work one side, then the other. The lenses are on tight, so apply steady pressure and they will slide loose. Avoid sharp tools that can mar the lens, and don't pry from the edge without finding the slots.
Hook the black wire to +12V and the white wire to ground. On a 1-wire setup the fixture grounds through its mounting, so run the separate white ground from the new light to a suitable metal surface where it can make a solid ground. Verify polarity before powering up to prevent issues.
Filters
