Light up your rig with Optronics LED light options that throw clear, bright illumination for cabins, enclosed trailers, or even above a shower stall. LEDs tend to last much longer than standard incandescent and don't draw as much power, making upgrades and replacements an easy win for everyday use.
Yes, installation is straightforward. The lenses can be tight—use a blunt tool on the cover slots to ease them off. Many housings offer multiple mounting holes to pick what's convenient. On some lights, white is ground and black is power—verify your wiring before crimping or grounding to a mounting screw.
Yes, an Optronics LED interior double dome light was confirmed as a great option above a shower stall. You get bright, clear light, with LEDs that tend to last longer and draw less power. Verify your 12V supply and mount location, then seal any penetrations as needed for moisture control.
Yes. A 1-wire setup uses the mounting to ground and the single lead as +12V. For a 2-wire Optronics LED, run the separate white ground wire to a suitable metal surface near the mount, and tie the black power lead into the switched +12V feed.
They put out plenty of light for loading and unloading and checking things from a side door. Brightness has been described as very bright with good coverage. For darker plywood interiors you may want more fixtures than with gloss white walls and ceiling to get the same effect.
Yes, they can be direct replacements when the footprint and wiring match. Check that the new light matches your existing cutout and mounting pattern for easy off, easy on. If you need to remove a tight lens, press at the cover slots with a blunt tool rather than forcing it.
Dome Light
Step Light
Strip Light
Utility Light
RV Interior Lights Parts or Accessories
Filters
