bing tracking image

RV Fireplaces - Flat Front

Filter by Width

Filters
1
Filters: Flat Front




What our customers are saying:
Great product. fast, professional, and well communicated service. it was a pleasure buying from y'all. thanks again
Tom
Fort Collins, CO


Flat Front RV Fireplaces for easy upgrades

Flat front RV fireplaces give you a straight, squared face that matches clean cabinet-style openings. Measure your wall cutout and match width, height, and depth so the swap goes smoothly—going a little larger is easier than framing a hole smaller. Adding one near an outlet? Verify the circuit's amperage and what else it powers before you plug in.
No, the proximity sensor cannot be turned off. Plan placement so pets don't activate it; a large dog within about 6 inches can trigger it. If this is a concern, consider mounting height and traffic paths. After install, test the sensor range and adjust surroundings to minimize false triggers.
Installation is generally straightforward. Expect some creative work depending on your cabinet or wall prep. These fireplaces use a standard 110 volt three prong plug-in, so no hardwiring is needed. You can plug into a nearby outlet or an extension cord to help reduce electrical load. Verify the circuit's rating and what else it powers if the unit lists around 12.5 amp / 1,500 watt.
Confirm the cutout width, height, and depth before buying. Replacement fireplaces often differ from the original, so plan for minor cabinet modifications. If upsizing, carefully enlarge the hole; if downsizing, be ready to frame the opening. Measure any front trim clearance in your space to avoid interference. Dry-fit the unit and confirm a nearby outlet reach before committing the screws.
Yes, a flat-front unit can be a clean replacement. Replacements rarely are an exact fit, so check your wall cutout size first. If the new unit is slightly larger, enlarging the opening is typically simpler than filling gaps. Some RVs come prepped; you may need to remove a cabinet brace or doors. Basic tools like a drill with Phillips bit and pliers covered one install. Inspect the front glass for chips before finalizing.