Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weight…
Hey Dennis, thanks for the picture! The Telescoping Dinette Table Leg item #TX73VJ does not have a size limit for the table top. 52” x 32” is going to be completely reasonable depending on the material. You can use whatever top best fits the space…
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…
Hi Daniel; the Thomas Payne RV Jackknife Sofa #TP76KR is just the sofa itself. The hardware is for the sofa assembly, any hardware you may need to mount to a frame can be picked up locally. If you don't have some kind of frame already you can…
Hey Margaret. The brackets of the Replacement Leg Kit for etrailer RV Dinette Tables item #e79RR are made of metal not plastic. The bracket base measures 6-5/16" in diameter by 2-1/4" tall. The leg itself is 28-1/2" tall overall with…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Lisa! I did some digging online and while I don't know what the exact bolt mount dimensions are for your Lagun table leg, I do believe that the Telescoping Dinette Table Leg #TX73VJ uses the same 4" on-center 6-bolt pattern (see attached…
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
The Everchill RV Refrigerator #324-000119 is the closest size refrigerator we have which will fit into the cutout for your Dometic RM1350. Your refrigerator fits a 63-3/16" tall by 32-3/4" wide and 26-1/16" deep opening. The Everchill…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
40L x 22W Inch RV Dinette Table for compact dining
Sized to fit tight layouts, a 40L x 22W inch RV dinette table keeps walkways open while giving you usable dining space. Match this footprint to your booth carefully—bench bottoms can be a little wider than the backs, so confirm both measurements for a clean fit.
Not necessarily. Check whether both the top and bottom are 22 wide. The bottom or seat of the dinette can be wider than the back, so compare each piece to the stated 22 width before deciding.
No. A 40L x 22W set is sold as enough cushions for one side. To complete left and right benches, order a quantity of two. If your setup is different, verify what comes in a single set before planning for both sides.
It's for one side. To outfit both the left and right benches you'd need two. Before ordering, confirm the contents so you know exactly what's included for a single side.
Confirm if both pieces are 22 wide. If your bottom cushion is wider than the top, verify the bottom against the 22 width so you don't end up with a tight or loose fit on the seat side.
Filters
