Can I Install Two Furrion ACs and Control Them Using My Exisiting Dometic Thermostat?

Updated 05/23/2023 | Published 05/21/2023

Question:

I have a 2006, allegro bus 43. I have Dometic three 15,000 BTU. I have replaced the rear with a manual Furrion unit. I am looking to connect 2 additional ACs to the front and center, preferably Furrion. At present, I have a Dometic 5 button control that also controls my aqua hot heating system. Can the rear unit be attached to the same controller? The serial number is 2011901436012101204 on the installed unit in the rear.

asked by: Jeffery H

Expert Reply:

Unfortunately, no you cannot add another Furrion air conditioner to your existing Dometic setup and be able to use the same controller.

These units use entirely different thermostats and would not work together. We do have units that are made to work in place of a Dometic AC and be able to use the existing controller like # ACDOM150, however since you're adding entire setups you'd need to use their controller.

I recommend going with the Furrion Chill HE RV Air Conditioner System # FR94FJ which is a kit that is going to have everything you'd need to install two new units to your coach. This kit contains two 15K BTU units, 2-air distribution boxes, 1 thermostat to control both ACs, and two multi-zone controllers.

expert reply by: Bryce D