1. RV & Camper
2. RV Cargo Slides
3. 26-1/2 Inch Longx

The overall width of the MORryde RV Cargo Sliding Tray - 72" x 20" - 2 Way Slide - 80 Percent Extension - 500 lbs part #MR74FR is 19.74" which is measured from the outside of each rail on either side. The tray width is…

I spoke with MORrdye, and they said that they do not have a dimensional drawing of the screw holes as their attachment uses TEK screws. They go on to mention that they've never had an issue reported as long as all the attachment points are…

No, I am sorry. The MORryde Camping Kitchens like item #MR73QR are all the same size because they're designed for Jeeps. It's collapsed dimensions are 26-9/16" long x 17-13/16" wide x 7-9/16" tall but the…

Charles, it looks like the Predator 5000 generator you have is a bit a too big so it's not going to work with the MORryde RV Generator Slide Out Tray #MR89RR. You'd need to use a bigger tray like the MORryde RV Cargo Sliding Tray…

Hey Don, The tray widths from MORryde are actually 1/4" smaller than the listed dimension so that they can fit said width. The MORryde RV Cargo Sliding Tray #MR47FR would be 60" in length x 25-3/4" in width so it would fit…

Hey Don, yes the MORryde sliding cargo tray part #MR89RR that you referenced does have ability to hold an 80 lb AC unit if that is what you are asking. This actually has a 250 lb weight capacity.

The MORryde Sliding Tray for RV Cargo Compartment - 72" x 20" x 6-5/8" - 500lbs - 2 Way #MR74FR has a 1.57" space between the mounting bracket and the floor of the slide.

From the floor where the MORryde sliding tray #MR49RR would mount to the bottom of the tray where your generator would sit measures 1-3/4 inches.

We have the MORryde RV Cargo Sliding Tray #MR93FR which is 90" x 39" with a 60% extension and is the closest available to the specifications you listed. From what I could find in my research from MORryde is that the 80% extension…

According to Westinghouse the iGen4500 is 24.5" long, 17.5" wide and 20" tall. This may not fit inside the MORryde RV Generator Slide Out Tray #MR79RR which has an internal dimension of 24-1/4" wide by 24"…

I attached a picture that shows all of the dimensions of the MORryde Sliding Tray for RV Cargo Compartment #MR93FR. This picture is actually in our product pictures already but it's buried pretty far down on the list of them.

For the MORryde #MR79RR slide out generator tray, there is not a lock or latch for the full out position. If it were me, I would look for a place to place a wedge to keep it out as necessary. I can't see any reason that you cannot run a…