Hi Darrin! The MORryde RV Cargo Slide Tray - 90" x 23" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR78RV can clear a lip up to 1.57 inches, so call it 1-1/2 inches to be safe. If you need it to be higher, we do also have the Height…
Hey Bob, thanks for reaching out, and good question. For that setup, as long as the tray is properly secured in the portion that is touching the floor, it will be just fine. It might be a bit more difficult to install since you can't secure the…
Hey Ethan. From the mounting point of your RV to the top of the carpeted base is going to be 2.31" on the MORryde RV Cargo Slide Tray item #MR78RV. The bottom of the tray sits 1.57" above the mounting point on your RV and the wooden base is…
Hi Chuck! The MORryde RV Cargo Slide Tray - 72" x 26" - 1 Way Slide - 60 Percent Extension - 800 lbs #MR67FR sits 1.6 inches above the floor you mount it on. If you want or need it to be a bit higher off the floor, you can also grab the…
Hey Tim. The 48" x 23" measurement is the entire MORryde RV Cargo Slide Tray item #MR63ZV. The inside tray dimensions are 46-1/4" long x 19-7/8" wide. The MORryde RV Cargo Slide Tray item #MR63ZV has a 800 lbs capacity and slides…
Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…
Hey Richard, I wish there was a way to lock out the MORryde sliding cargo trays like the part #MR76FR in the extended position but that's just not a feature they have. They can lock in the retracted position but not extended. Are you loading…
You can go with a listed 29" model of the MORryde RV Cargo Sliding Tray as its actual width is 28-3/4". Please note the attached image showing dimensions of width. We have the #MR69FR that is 90" in length by 29" wide and has a 2…
Hey Jeff! For a replacement I recommend the etrailer Electric Trailer Jack #e23ZV. This is a direct replacement with the same 18" lift and 3,500 lb capacity as your FIC-ETJ3500-LP10. If you want something with a little more power we have the…
Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…
Hey Arthur, The dimensions I'm seeing for a 3500watt Predator Generator show it being 22.8" L x 17.3" W x 20" T so if you're wanting it to sit with the 17.3" side facing out the closest fit would be the MORryde RV Cargo…
While there is no visual guide available to determine the sizing for the MORryde sliding cargo trays like the #MR38FR, it really depends on the height, length, and depth of your RV compartments opening. The #MR38FR that you were looking at, for…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
RV Cargo Slides for 36 Inch Wide Storage
Make your pass-through work harder with 36 inch wide RV cargo slides that bring gear to you. Choose 2-way access for doors on both sides or 1-way designs with 60 percent extension to match your space. Measure the opening's length, width, and height, consider your cargo, and add a height adjustment kit that raises 2-1/2", 2-3/4", or 3-1/8" to clear a lip; slides lock retracted, not extended.
They lock in the retracted position, not in the extended position. When loading, keep a hand on the tray and avoid bumping it so it doesn't roll back on you. If you need it to stay out while loading heavy items, plan your staging or add a brace so it can't slide unexpectedly.
Measure the opening's height, length, and depth to confirm clearance for a 36 inch wide slide. A 90 x 36 unit needs about 90" L x 36" W x 6-5/8" H space, and its inner tray is about 88-1/4" x 32-7/8". Factor the height of your cargo, not just the tray. If there's a compartment lip, use a height adjustment kit that raises 2-1/2", 2-3/4", or 3-1/8" to clear it.
Install is generally simple and can be done in under a couple hours; two people make it easier. Expect a small loss of cargo space due to the tray and rails, but access improves and it helps save your back. Measure completely before drilling, and consider a riser if your floor isn't level or you need extra clearance.
A 90 x 36 slide weighs 150-lbs and has an 800-lb maximum capacity. Slides in this size are described as very heavy duty and roll with ease even when fully loaded. Check your compartment structure and fastener locations to support the load you plan to carry.
Filters
