Thanks for asking Glen, I found the specs you were asking about. Bigfoot Hydraulic Tongue Jack #BF34FR has 16.5 inches of lift, and when it’s fully extended it measures at 24 and a half inches overall. Retracted, it sits at 8 inches, so you get a…
Hey Bill. We've got just over a dozen options for 15" steel wheels that'll work with the Kodiak Disc Brake Kit item #K2R35S, you were looking at. I have linked our selection below. The 15" x 6" Rim Dexstar Steel Mini Mod…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hey Josh, so we can help but we don't have any custom fit gooseneck hitches that fit your 1976 Ford F-250. Best option would be a universal style option like the Curt plate part #C65500 which would need to get welded to the top of the truck frame…
The Thule Wingbar Evo crossbars like #TH711320 have channels on top of them that standard roof rack accessories that are designed for channel mounts. The track nut part #853-5715 that you referenced would fit in this top channel as well.
Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.
Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…
I would be happy to help! Since your 2021 Subaru Outback Touring XT has the factory 4-way connector I recommend using the 7-way Connector Kit #ETBC7L which is designed specifically for wireless trailer brake controllers. This 7-way plugs into your…
No, they're not the same. The BP01-301 fits 12-1/4" x 4" Dexter brake assemblies and the BP01-330 DEXTER fits newer Dexter brake assemblies made after 2017 that are 12-1/4" x 5". We are out of the BP01-301 as well and have…
Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…
The correct bearing kit for a Dexter 4,400 lbs axle is item #BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a Lippert 3,500 lbs axles. This kit includes inner bearing item #L68149, inner race item #L68111, outer bearing item…
Padlocks for universal application with keyed alike convenience
Simplify your setup with keyed alike padlocks so a single key works across multiple locks. The universal application padlock design fits everyday jobs like securing a trailer hitch, a bike cable, or the garage, so you can lock up different gear without juggling keys.
Possibly—check with a local locksmith. They may be able to cut a key using numbers stamped on the lock body. Keep a record of your key code when you receive your locks to simplify future key work.
Yes—choose the Keyed Alike option and order the total number you need at once. Add every lock you want on that same key at the same time so they match. Coming back later to match a past key set typically isn't available.
It helps deter theft but can be cut with bolt cutters if someone has time and access. Use it to discourage the casual thief, and pair it with hardened chains or shielded hasps when possible. Position the shackle to make cutter access harder.
It can, but corrosion is a concern in snow and rain. Use protective covers when included and apply periodic lubricant to the keyway and shackle to help prevent sticking. If the lock is exposed often, consider stainless steel construction to reduce rust in harsh conditions.
3/8 Inch Diameter
5/16 Inch Diameter
Padlocks Parts or Accessories
Filters
