1. Trailer Parts
2. Hand Tools
3. Carbon Steelx

Yes, you can attach a LockNLoad platform to the bottom of the Yakima EasyRider Double Decker Trailer item #Y08129 but not that one because it's too wide. Instead you'll need the 84" Long x 49" Wide Yakima LockNLoad…

Hello Greg, I cannot personally see any difference between the M40i and sDrive for the 2019 BMW X3. We haven't done an install on the M40i, so I can't say for sure what the difference would be regarding the #C99RV hitch and #SH46FR…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

Hey John, there's no reason you couldn't use the Blue Ox Wheel Chocks part #BLU47UR on all 4 wheels of your trailer as like a temporary lift. The pair alone has a 30k weight capacity as well so in that regard it would work great too.

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

Hello Harlow, thanks for reaching out. We do have the Replacement Head #BXW4011 which fits the Blue Ox SwayPro Weight Distribution Systems. Regrettably we do not carry the bolts that go with this. Your will need grade 5 zinc-plated 3/4”-10 x 4” hex…

Hey Tom, There is a bike rack I highly recommend for your 2024 Toyota Crown and the Curt Trailer Hitch #C77ZV, which is the Saris Freedom Bike Rack for 2 Bikes #SA4412B. What I love about this rack is its unique combination of being easy to handle…

The Firestone In-Cab Pressure Gauge #F2196 will work with the AirLift systems. If you can tell me the part number of which AirLift kit you have I can try and help you with that system if you'd like.

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75600 which is a fit for a 2015 BMW X5 actually comes with the poly rivets that you'll need to use to reattach the fender trim. If you need the tool as well, we do carry one you can use for…

To replace a hitch ball on the Blue Ox SwayPro Weight Distribution #BLU66FR you will need a 1-7/8" 12pt Thin Walled Socket #ALL643216. This socket will fit inside the opening for the nut that fastens the hitch ball. The socket will require a…

First you will need to determine if you have the Old Style Head #BXW4011, New Style Head #BLU54XR, Old Style Underslung #BXW4012 or New Style Underslung #BLU34XR for your Blue Ox SwayPro weight distribution. The difference is how the spring bars…

Yes, the Powerbuilt Thin Walled Socket #ALL643216 or the Fastway/Equal-i-zer part #EQ70-00-4800 will allow you to properly torque the hitch ball in your Fastway weight distribution system #FA94-00-1000.

Yes, you can attach a LockNLoad platform to the bottom of the Yakima EasyRider Double Decker Trailer item #Y08129 but not that one because it's too wide. Instead you'll need the 84" Long x 49" Wide…

Hello Greg, I cannot personally see any difference between the M40i and sDrive for the 2019 BMW X3. We haven't done an install on the M40i, so I can't say for sure what the difference would be regarding the #C99RV hitch and…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

Hey John, there's no reason you couldn't use the Blue Ox Wheel Chocks part #BLU47UR on all 4 wheels of your trailer as like a temporary lift. The pair alone has a 30k weight capacity as well so in that regard it would work great too.…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a…

Hello Harlow, thanks for reaching out. We do have the Replacement Head #BXW4011 which fits the Blue Ox SwayPro Weight Distribution Systems. Regrettably we do not carry the bolts that go with this. Your will need grade 5 zinc-plated 3/4”-10 x 4” hex…

Hey Tom, There is a bike rack I highly recommend for your 2024 Toyota Crown and the Curt Trailer Hitch #C77ZV, which is the Saris Freedom Bike Rack for 2 Bikes #SA4412B. What I love about this rack is its unique combination of being easy to handle…

The Firestone In-Cab Pressure Gauge #F2196 will work with the AirLift systems. If you can tell me the part number of which AirLift kit you have I can try and help you with that system if you'd like.

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75600 which is a fit for a 2015 BMW X5 actually comes with the poly rivets that you'll need to use to reattach the fender trim. If you need the tool as well, we do carry one you can use…

To replace a hitch ball on the Blue Ox SwayPro Weight Distribution #BLU66FR you will need a 1-7/8" 12pt Thin Walled Socket #ALL643216. This socket will fit inside the opening for the nut that fastens the hitch ball. The socket will require…

First you will need to determine if you have the Old Style Head #BXW4011, New Style Head #BLU54XR, Old Style Underslung #BXW4012 or New Style Underslung #BLU34XR for your Blue Ox SwayPro weight distribution. The difference is how the spring bars…

Yes, the Powerbuilt Thin Walled Socket #ALL643216 or the Fastway/Equal-i-zer part #EQ70-00-4800 will allow you to properly torque the hitch ball in your Fastway weight distribution system #FA94-00-1000.