Buyers Products Vise Mount for Utility Truck Bumpers

Video Transcript for Comprehensive Review: Buyers Products Vise Mount for Utility Truck Bumpers

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Buyer's Products vise mount for utility truck bumpers. This is going to easily bolt on to your truck's bumper, it's gonna act like a work bench to provide a sturdy support, so you can use your vise at any job site. This will work with most service and utility truck bumpers and you can see, we do have pre-drilled holes here on the front and on the top for easy attachment of our vise and for height adjustments to accommodate different working heights. So this will will accommodate your vises with a 3 1/2 inch, a 4 inch, or a 4 1/2 inch bolt pattern such as the Wilton models that you see on the screen there. And we do also have the height adjustment that's going to allow us to go from 2 inches of rise above the bumper up to a 8 inches of rise in 1-inch increments, so that we can get it set at just the right height for you.

They do include these 1/2-inch bolts that will allow us to attach the mount to the bumper, have a nice secure connection. Now this is a durable 3/16-inch-thick steel construction, so it is going to give us a very strong surface to work off of. It does have this black powder coat finish to resist corrosion, and you can see, we do have the two brackets. I have them loosely bolted together right now but those nuts are lock nuts, so I'm not gonna thread them down all the way for demonstration purposes. But to give you an idea of the dimensions here, our overall width for both brackets is right at 7 5/8 of an inch, just over 7 1/2 inches wide, our height, we're looking at about 9 inches tall, and then our length here, my ruler is just a little over 12 inches, as you can see, so we're looking at about 12 1/4 inch long.

Our lower bracket length, it's gonna be a little bit more difficult to show, but it is approximately 5 5/8 of an inch. And its height is right about 1 3/4 of an inch. And so you are gonna get these bolted on and then you've got two bolt holes down here at the bottom and then two bolt holes here at the back to get this mounted onto your truck. And then of course, you'll have those height adjustments and the vise mounting holes up here at the top. This bracket set is made here in the USA, so you can trust it is gonna be a good quality for you.

And especially on your work trucks, you wanna make sure that all your equipment is gonna hold up really well. I think this is gonna do a great job for you, giving you that nice solid place to mount your vise so that you have it wherever you're going. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..