1. Home
2. Camping Accessories
3. Hammocks

Hi Tom, There is always the option for you to use a universal, splice-in 4-way for the 2024 Ford Ranger, the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236. As for the #C86RV, it hasn't been made yet so there…

I checked and although there is not a bushing for the Bulldog Swivel Jack - Topwind #BD178101, we do have a 5,000 lb Bulldog A-frame jack with a short retracted height that is going to be exactly what you need. The Round A-Frame Trailer Jack -…

I believe we have exactly what you're looking for, for your 1991 Provost RV. Take a look at the: -EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting #F02-3112CL. This is a clear 90° fitting that will fit onto a standard…

For starters, if you have a 2018 Ford F-150 with the 6-1/2' long bed then you are going to want to use the Rightline Truck Bed Tent part #RL110730, not part #RL110710 which is for an 8' long bed. With that being said you would need to remove…

For your trailer and situation I recommend the Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR. This dolly is rated for trailers with a tongue weight up to 1,200lbs and a trailer weight up to 12,000lbs. Your trailer has a maximum trailer…

Yes, the 7-Pin Round connector is wired differently than the 7-Way flat RV connector. I will list the typical heavy duty truck wiring connections inside the plug on the trailer side for you. At the index guide for plugging the trailer end in to the…

I did a little digging on your grease seal number and it looks like the 16074-224 has an inner diameter of 1.5 inches and an outer diameter of 1.987 so the correct part number you would need is the #10-9.

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

I went out to the warehouse and found that the thread of the bolts in the Hardware Kit #DM6166 you referenced is about 1-3/4" long while the overall length of the bolts is 2-1/8" which you can see in the attached photo.

The 10 to 18 inch measurement is referring to the wheel/rim only - not the whole tire - for the Trimax wheel lock, which is the following part number: - Trimax Heavy Duty Adjustable Wheel Lock with Padlock - 10" to 18" Wheels #TMX42ZR

The 14 inch wheels we carry have a 5 on 4-1/2 bolt pattern like part #AM20352. We also carry 14-inch tire/wheel combos with a 5 on 4-1/2 bolt pattern like part #TA65MR. I have attached links to the wheels and tire/wheel combos we do carry. I am not…

Thanks for the picture! I would definitely go with one of the HD kits over the 2,000 lbs RoadActive item #RAS3611 you were looking at. Which one you will need is going to depend on whether or not your 2020 Chevy Silverado 2500HD has the factory…