Hey Spring welcome back! The 1/2"-20 Taskmaster Trailer Wheel Lug Nut item #TA66QR has a 1-3/8" overall length. This is a 60° conical cone lug nut and is chrome plated. For a 1-1/2" long 1/2"-20 lug nut, you'll need the…
Hey Mike, thanks for reaching out. Yep, the Victron SmartShunt 500A #VN43ZR will work just fine with a 24-volt lithium battery bank. It's compatible with battery systems from 6.5 to 70 volts, so a 24V LiFePO4 setup is well within its operating…
Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…
Although a surge protector like the #HU97FR is always a good idea it isn't required. The only thing you really need is an adapter like the #A10-1530DBK or #CAM55223 to be able to plug into your home outlet.
The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.
Hello Jeff, good question. The short answer is, probably not. All weight distribution (WD) hitches have a range of tongue weights they will work with, and you want to make sure your trailers weight falls within that specified range. For example, the…
Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…
Hey Tim, I spoke with Hughes and they sent the following in regards to your questions: 1."I see that there is a QR code to pare the device with a smartphone. Great! But is there a security feature or password setting to keep others from paring…
Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…
It's actually on the opposite side of your water heater based on your picture. You need to access the other side and look for the panel I attached a picture of and remove it to access it. I attached a diagram picture that shows how to access it…
Hello Elizabeth, thanks for reaching out. It sounds like you are needing to replace the ladder receiver on the back of your RV. Unfortunately, these brackets are only installed from the factory, and we do not have an aftermarket replacement option…
Y-Adapters are essential for enthusiasts needing to split power sources efficiently. They offer robust construction and reliable performance, perfect for RVs and heavy-duty applications. Ensure a snug fit to avoid exposed connections and enjoy seamless power distribution.
Y-Adapters are perfect for splitting a single power source into two, making them ideal for RVs or setups requiring multiple connections. They are built with high-quality materials to handle heavy-duty use, ensuring durability and reliability in various conditions.
Y-Adapters are crafted from top-notch materials, providing excellent durability and performance. They are designed to withstand high power loads, making them suitable for demanding applications like RVs and outdoor events where reliable power distribution is crucial.
Some users have noted that the prongs on certain Y-Adapters may not fit perfectly into all sockets, leaving a small gap. This can be managed by ensuring compatibility before purchase or using electrical tape for added security during use.
A snug fit ensures that connections are secure, minimizing the risk of exposed connections which can be a safety hazard. It also ensures efficient power transfer, preventing any potential power loss or damage to the equipment.
Look for Y-Adapters with high-quality construction and compatibility with your existing equipment. Consider the power requirements of your setup and ensure the adapter can handle the load. A snug fit and durable materials are key for long-term reliability.