Choose blue to keep your setup looking sharp. For covers, take simple length, width, and height measurements to confirm a good fit on your outboard, with a wide selection of sizes available. Straightforward sizing helps you land the snug result you want.
Yes, use simple length, width, and height measurements to select the size. Check that each dimension is within the cover's limits. If a cover seems tight on one measurement, size up to reduce strain on seams and make installation easier.
Measure your motor's length, width, and height, then match those to the cover's listed dimensions. If you can't find factory specs for your year, take your own measurements and compare. Make sure the motor's tallest point and widest point are within the cover's limits to help ensure a good fit.
A snug fit comes from matching your measured length, width, and height to the cover specs. Look for a size that closely matches without forcing it over corners. If installation feels overly tight or won't seat fully, recheck measurements and choose the next size up to help prevent tearing.
You need the motor's overall length, width, and height. Measure from the top of the cowling to the bottom edge you want covered, and across the widest and longest points. Compare these to the cover's stated max dimensions to confirm compatibility.
11L x 11W x 16T Inch
15L x 12W x 24T Inch
20L x 10W x 14T Inch
24L x 23W x 31T Inch
25L x 17W x 25T Inch
Boat Motor Accessories Parts or Accessories
Filters
