Videos
for Boat Flags
Help Articles
for Boat Flags
Expert Answers
for Boat Flags
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…
view full answer...To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…
view full answer...There are a few things that you will need to know in order to choose the right disc brake kit for your 2003 DHM boat trailer. I assume you have idler hubs and are replacing your brakes so you already have a 4-bolt brake mounting flange #4-35 as well…
view full answer...Yes, it is! The Curt Front Mount Hitch item #C31076 fits the 2021 Toyota 4Runner Pro but it requires complete removal of the skid plate and some modification. We've had quite a few customers do this successfully with your generation of 4Runner.…
view full answer...Jeffery, the skid plate on your 2021 Toyota 4Runner will need to be removed to install the Curt Front Mount Trailer Hitch Receiver #C31054. That info is actually already posted on the page, which I've attached for you to check out.
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…
view full answer...The overall height of the UWS Truck Bed Chest #UWS01047 is 17-1/4 inches which is going to be shorter than the height of your truck bedrails so it will pretty easily fit underneath your tonneau cover. Now without knowing the length of your bed and…
view full answer...When installing marker lights we recommend using 18 gauge wire like #SWC97FR. This is stranded wire and is what we typically use when wiring marker lights like the #MCL32ABB for example. LED marker lights pull very low amperage so 18 gauge is likely…
view full answer...Other than potentially pinching or damaging the wiring on your Ground Control 3.0 System #LC358590, I don't see any reason why you can't do this; it's really no different than taking the jack off and re-installing it. My tech contact over…
view full answer...With the leg of your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC358590 being that bent the auto-level feature would either not function at all (if it's damaged enough to sense there's an issue) or wouldn't be able…
view full answer...I wasn't able to find any specs on the Magic Chef CLY222OBDB you mentioned, but the Furrion 2-in-1 Range Oven #FR97KR is a great replacement oven as long as the cutout you're putting it in is 21-1/2" Wide x 21-1/2" Tall x 20"…
view full answer...