Boat Accessories - Fixed Cleat

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

Hey Robb, we don't have any videos yet for the Atwood folding rope ladder part #AT82ZR but since each section has the rope running down the middle of it and they can move up and down on the rope it basically would fold up section by section. How…

I attached a picture I got from Pace that covers exactly what the maintenance looks like for the Pace Switchblade tonneau covers like part #311-SWFA06A29 that you asked about.

The closest axle we have to what you need is the part #20440I-EZ-60 which has very similar specs as what you need, but the spring center is off by one inch as it is 48 inches on this axle. The overall capacity is 2,000 lbs and the hub face to hub…

Hey Walter, the Karrier tires part #AM10210 and #KE78KV both are really similar tires from Karrier. They both have same speed rating of 81 mph, Load Range of D, and weight capacity of 1,650 lbs. The only really noteworthy difference is the tread…

Hello Brad, thanks for reaching out. For a compressor system to go with your Air Lift LoadLifter 5000 air bags I recommend the following: - Air Lift WirelessONE Suspension System for Air Helper Springs - Remote - Bluetooth - EZ Mount #AL77DQ This…

Thanks for the picture! To be able to install the 5' Dutton-Lainson Boat Trailer Deluxe Roller Bunk #DL21741 on your trailer you can simply bolt them to your existing carpeted bunks due to you not having any center supports on your trailer. Keep…

The Dutton-Lainson Roller Bunk #DL21741 that you referenced can be installed directly on top of your existing wooden bunks. According to the installation instructions when mounting over wooden bunks a 3/8 inch diameter lag screw is required. The…

Yes, the galvanized Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections part #DL21741 is what you are looking for. The rollers are constructed of 12-gauge, galvanized steel and have zinc-plated steel rollers hardware included. This…

The hidden crosstubes are definitely the way to go as they offer the best aesthetic for your 2021 Ford Edge, and between the Curt Trailer #C78KR, etrailer #e36RR, and Draw-Tite #75234, the best option is the latter: - Draw-Tite Max-Frame Trailer…

Hello Justin, thanks for reaching out. Going from a load range C tire up to a load range D likely will not change the ride quality in any noticeable way. You would not be increasing the carrying capacity of your trailer, but the higher rated tires…

The Fulton XLT jack part #F141401 would need to run to the 12 volt accessory circuit of the 7-way on the trailer for the black wire and then to the ground circuit for the white wire. If you check out the attach diagram you'll see where these…