We offer 4 Class III hitches that are a confirmed fit for your 2015 Ford Edge Sport: • etrailer brand Class III hitch, part #e36RR • Curt Class III, part #C78KR • Curt Class III, part #C13234 • Draw-Tite Class III, part #75234 I'd eliminate the…
Hey Daniel, welcome back! You do not have to strip the wires before installing them on the TowSmart 4-Way Flat Connector Rapid Repair Trailer Wiring Kit item #TS68QR. The 4-way connectors have sharp metal prongs that slice the wiring insulation or…
The best I can do, without knowing your exact golf cart model, is show you how to calculate the maximum weight you can carry on your 2022 Ford F-250 when using the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps - 1,400-lbs - 2" Hitch, part…
There is a potential solution for you but the Arched Loading Ramp Set #288-07432-2 you referenced would not work with your 2017 GMC Sierra 2500HD with a 39-1/2 inch bed height. Instead, you may be able to use the Erickson Arched, Aluminum Loading…
To replace the OEM ramp for your 2002 Triton Elite, I recommend the Loading Ramp Set - Steel - 48" Long x 11" Wide x 1-1/2" Thick - 1,600 lbs - Qty 2 #288-07474-2 or the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" - 6,000…
I've attached the wiring diagram for you to check out, but it sounds like the compressor for your #AL57289 is not getting power. The wiring harness has an ignition wire which if not connected to an ignition source, will not wake up the compressor…
It won't be an issue. Since the combined weight of the #288-07452-2 is 1500 pounds, the ramps are designed to withstand the 1,450 pounds of your mower. However, if you are worried about it, you can always go with the #288-07474-2 which has a…
Hey Chris, the good news is yes, the Roadmaster Direct-Connect Base Plate Kit #RM-524431-5 that you have for your 2020 Ford F-150 Raptor will also work for your 2025 Ford F-150 Raptor. As of right now it does not look like we have an install kit for…
Hey Michael! The etrailer Electric Trailer Jack w/ 7-Way #e74GV you were looking at will definitely have enough lift for your Coleman 13R. This is a great option if you just want to power the jack off the 7-way on your vehicle instead of running it…
Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…
E-Track such as the Erickson Horizontal E-Track #E19148 can be used in any way that allows you to mount your pair of motorcycles. As you can see in some of the photos I've added, there is not a set way to add the track. You will need to take…
Since you do not have a need for trailer brake wiring I have just what you need. I recommend the T-One Wiring Harness, part #118341. This harness includes the converter you need for your 4Runner, so you do not need another converter. The converter…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
ATV Ramps with 80 Inch Length for stable loading
The 80 inch length hits a sweet spot for loading an ATV into a pickup or trailer without getting overly steep. If your loading height is taller, a longer ramp reduces the angle. Options include folding and arched designs with slip-resistant ends and carry handles for easier setup and storage, and you can use a pair for ATVs or three pieces for 3-wheel setups when needed.
They can work, but the steeper angle from a tall bed can make loading harder. Measure your loading height and see if the 80" length gives you a comfortable approach. If the angle looks too steep, step up to a longer ramp to reduce it. For a more secure setup, choose ramps with features that help them stay put on the tailgate or trailer edge.
Yes, using three ramps is a common approach for trikes, and two for golf carts. Verify each ramp's width fits your tires and the combined capacity exceeds your vehicle weight. If you want easier storage, look for 80" ramps that fold. For higher loading heights, a longer set can help reduce the angle.
Folding 80" ramps save space and are easier to stow. Carrying handles make moving them simpler from garage to truck or shed. If you'll load equipment with small wheels, choose a surface that won't catch the wheels. Add tie-downs or safety straps as needed to help prevent shifting during use.
Yes, with the right surface. Pick an 80" ramp with a deck or heavy-duty grating that won't trap small wheels. Check that the ramp has a way to maintain position so it doesn't slip when you're pushing up or down. If your entry point is elevated, the 80" length helps reduce the effort compared with shorter pieces.
Filters
