Product Experts Available Now!
Call 1-800-940-8924
Timbren Rear Suspension Enhancement System VS Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
Product Specs:
Vehicle Suspension
Towing/Load Leveling
Bump Stops
Rear Axle Suspension Enhancement
Standard Duty
Suspension Only
Timbren
2,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability.
Video of Timbren Rear Suspension Enhancement System
Customers compare THROD2 to these similar products
Ask the Experts about this Timbren Vehicle Suspension
Do you have a question about this Vehicle Suspension?
- Difference of Suspension Enhancement Springs on a 2007 Honda Odyssey
- Choosing between jounce-style springs, coil helper springs, and air springs depends on why you need them in the first place. All three improve your ride, absorb shock, and will help prevent your 2007 Honda Odyssey from sagging. However, the jounce-style are not engaged when the vehicle is not loaded and are there for additional support when it's needed. Air springs however are always being used to help your ride. Also, the psi can be adjusted based on the amount of weight in the vehicle....
view full answer...
Product Specs:
Transmission Coolers
Plate-Fin Cooler
With 11/32 Inch Hose Barb Inlets
11W x 8-3/4T x 7/8D Inch
Mid-Size Truck
SUV
Van
Standard Mount
Derale
11" Wide x 8-3/4" tall x 7/8" deep, efficient heat exchanger will prolong the life of your transmission and improve its overall performance. Specifically designed for vehicles with late-model, electronic overdrive transmissions.
Video of Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
Customers compare D13503 to these similar products
Ask the Experts about this Derale Transmission Coolers
Do you have a question about this Transmission Coolers?
- Difference Between Derale Series 8000 Transmission Cooler # D13503 and # D13502
- Both the Derale Series 8000 Transmission Cooler # D13503 and # D13502 referenced in your question are plate-fin style coolers that differ only in their size. Both systems will work to cool your transmission fluid in the exact same manner, by allowing the fluid to spread out along finned chambers for quicker cooling.
The Derale # D13503 is slightly larger at 11 inches wide, 8-3/4 inches tall, and 7/8 inches deep, compared to the Derale # D13502, which features the same width and depth,...
view full answer... - Is a Transmission Cooler With Fan a Better Option Than the Derale 8000 Series Cooler # D13503?
- The main benefit a Remote Cooler with Fan # D12743 has over the Derale # D13503 is constant airflow being pulled through the fan. This helps if you spend a lot of time is more stop and go traffic or driving at slow speeds. Being able to pull the air across the cooler will help keep the temperatures cooler at lower speeds.
view full answer... - Comparing Plate-Fin and Tube-Fin Transmission Coolers for a 2019 Ford F-150
- Out of the Derale # D13503 and # D12903 I recommend going with the former over the latter on your 2019 Ford F-150. Reason being that the part D13503 is a plate-fin cooler which is more efficient than the D12903 which is a tube-fin cooler.
I have attached some helpful articles to help you determine where the best location is to mount the cooler on your F-150.
view full answer... - Comparing Derale Transmission Coolers for 2009 GMC Sierra SLT 1500 5.3L Towing 26ft 5,400lbs Trailer
- Good news, I can help you compare the two Derale transmission coolers as well as help you select the right one for your 2009 GMC.
The main differences of the two transmission coolers # D13503 and # D13504 are the size and Class number. The # D13503 measures 11 inches wide and 8-3/4 inches tall while the # D13504 measures 11 inches wide and 12 inches tall. The # D13503 has a Class III rating and the # D13504 has a Class IV rating. The Class rating to let customers know that if they...
view full answer...